My OCT start with SLD ERROR 01.
I disassembled the machine, replaced the SLD driver board with a one taken from a working machine in order to try if It works, buy i get the same error.
The error rise even if the cable (#905) connecting the grab board to the main board of the OCT (not the PC one) is disconnected ( the cable Is ok)
I searched for some burned components on PC boad, grab board and oct mainboard buy everything looks like ok.
The only thing I noted Is that the led #5 on oct mb blinks
I found that some OCT2000 have the same error buy not found any fix
Someone can help me?
Thank you
Unfortunately not.
I tried several times in different ways, releasing the finger in different moments during startup but no service mode.
Is there any other way to enter service mode? i.e. using an external keyborad or mouse?
Online auction of modern high-end laboratory and biopharma research equipment from the recent bankruptcy of Spexis AG in Allschwil near Basel, Switzerland. Start bidding today! closes on June 4. info@dome-auctions.com..+31(0)20 808 2880
rudy
Topcon OCT 2000
October 17, 2025 10:04
My OCT start with SLD ERROR 01.
I disassembled the machine, replaced the SLD driver board with a one taken from a working machine in order to try if It works, buy i get the same error.
The error rise even if the cable (#905) connecting the grab board to the main board of the OCT (not the PC one) is disconnected ( the cable Is ok)
I searched for some burned components on PC boad, grab board and oct mainboard buy everything looks like ok.
The only thing I noted Is that the led #5 on oct mb blinks
I found that some OCT2000 have the same error buy not found any fix
Someone can help me?
Thank you
to rate and post a comment
jevrem doderovic
re: Topcon OCT 2000
October 20, 2025 11:40
I have the same problem. Can your machine enter service mode?
to rate and post a comment
rudy
re: re: Topcon OCT 2000
October 20, 2025 02:00
How can I enter service mode?
to rate and post a comment
jevrem doderovic
re: Topcon OCT 2000
October 21, 2025 10:30
Did you manage to solve the problem?
to rate and post a comment
rudy
re: re: Topcon OCT 2000
October 22, 2025 08:51
Unfortunately not.
I tried several times in different ways, releasing the finger in different moments during startup but no service mode.
Is there any other way to enter service mode? i.e. using an external keyborad or mouse?
Thank you
Rudy
to rate and post a comment