FRIENDS,
I have a problem with a Bennett Contour Plus.
The problem started with the downward compression. When I pressed the pedal, the compressor, goes down, but it doesnt stop when I release the pedal. After that, it stopped working the downward compression, and it doesnt communicate with the control module. Now, When I press the pedal the Light turns on, the relay activate, but the compressor does not go down.
Please, let me know if someone can help, or provide the technical manual.
Thanks in advance.
Eduardo Firmiano
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
Eduardo Firmiano
PROBLEM WITH A BENNETT CONTOUR PLUS
November 06, 2006 01:29
FRIENDS, I have a problem with a Bennett Contour Plus. The problem started with the downward compression. When I pressed the pedal, the compressor, goes down, but it doesnt stop when I release the pedal. After that, it stopped working the downward compression, and it doesnt communicate with the control module. Now, When I press the pedal the Light turns on, the relay activate, but the compressor does not go down. Please, let me know if someone can help, or provide the technical manual. Thanks in advance. Eduardo Firmiano
to rate and post a comment
Howard Karp
Re: PROBLEM WITH A BENNETT CONTOUR PLUS
November 14, 2006 09:41
check the connections on the compression drive motor. I had a similar problem and found a cold solder connection at the motor under the heat shrink.
to rate and post a comment