Dear all,
i had a defective power supply at HD 11, it was occured by some defective capacitors. C616 and 617, 200V, 470µF were defective, i made all new on the left board (seen from behind).
The Power-Supply runs now.
But i have still a problem: it only starts when i cancel the connection from pc to the left US-Board
(orage clips). Otherwise it shuts down immediatelly when start, the green AC-ligt goes of. If i cancel the connection an give ac to the monitor, the system starts up, the HD11 software is shown. Now i can connect while running the system. all lights on power-supply go on and if i then restart the system, it works fine.
Please can somebody help me? Do somebody know the maintenance password? Its very urgently! Thanks for your help! Holger
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Holger Fritze
Problem Philips HD11 V1.07, password needed
June 07, 2011 04:20
Dear all,
i had a defective power supply at HD 11, it was occured by some defective capacitors. C616 and 617, 200V, 470µF were defective, i made all new on the left board (seen from behind).
The Power-Supply runs now.
But i have still a problem: it only starts when i cancel the connection from pc to the left US-Board
(orage clips). Otherwise it shuts down immediatelly when start, the green AC-ligt goes of. If i cancel the connection an give ac to the monitor, the system starts up, the HD11 software is shown. Now i can connect while running the system. all lights on power-supply go on and if i then restart the system, it works fine.
Please can somebody help me? Do somebody know the maintenance password? Its very urgently! Thanks for your help! Holger
to rate and post a comment