The systems tries to boot and almost at the end ask you for a license " HW ID 0x000C4CD0 SW License There is no valid license on this system Enter a vald key"
I wrote the serial number of the system without any luck. They told me that recently somebody brought some discs and try to load sfw and since then the system is like that. They do not have any sfw disc at all in the site. can you help me with this problem?
The dongle is working just fine since the system knows the hardware ID off of the dongle. The problem is when you reload software it erases your option keys. Those keys should of been printed off before reinstalling software. If you do not have the option keys saved somewhere, you can call GE with the serial number of the system and they can look up those option keys.
Therapeutic Technologies closeout auctions take place on DOTmed.com. Bid today on 538 lots of medical equipment. Inspections may be done by appointment. Hours are Monday through Friday 9am-4pm Contact chrisnuytens1@gmail.com to schedule.
Jorge Flores
problem on a GE Logiq 3
March 05, 2013 11:43
The systems tries to boot and almost at the end ask you for a license " HW ID 0x000C4CD0 SW License There is no valid license on this system Enter a vald key"
I wrote the serial number of the system without any luck. They told me that recently somebody brought some discs and try to load sfw and since then the system is like that. They do not have any sfw disc at all in the site. can you help me with this problem?
best regards,
Jorge Flores
to rate and post a comment
Volodymyr Markevych
re: problem on a GE Logiq 3
March 05, 2013 06:00
Open the back plastic cover and check for licence key. There is shoud be label with s/n and 5 x 5 digit/letters key.
to rate and post a comment
augustin noutegne kengne
re: re: problem on a GE Logiq 3
March 13, 2013 10:49
I have the cd of applying logiq 3 but I do not know how to send it or you find you?
to rate and post a comment
edgard okeke litombo
re: re: re: problem on a GE Logiq 3
November 19, 2014 03:07
Hi augustin noutegne kengne
I have a logiq 3 too but not the CD of applying
can u help me send one copy please ??
my mail : litombo01@gmail.com
to rate and post a comment
Alberto Fernando Herrera Zorrilla
re: re: re: re: problem on a GE Logiq 3
August 13, 2018 10:33
my mail: albertohz@yahoo.com
to rate and post a comment
Alberto Fernando Herrera Zorrilla
re: re: re: problem on a GE Logiq 3
August 13, 2018 10:34
I need cd of applying of logic 3 too
pleas contact me at: albertohz@yahoo.com
to rate and post a comment
Rey Gonzalez
re: problem on a GE Logiq 3
March 05, 2013 11:22
Contact me rey@allultrasoundservices.com
to rate and post a comment
punna rao
re: problem on a GE Logiq 3
March 06, 2013 08:53
i think dongle problem
to rate and post a comment
Jorge Flores
re: re: problem on a GE Logiq 3
March 06, 2013 12:07
What is dongle?
to rate and post a comment
punna rao
re: re: re: problem on a GE Logiq 3
March 06, 2013 02:24
give me your mail id i will sent dongle photo graphs
to rate and post a comment
Brian Eberling
re: re: re: re: problem on a GE Logiq 3
March 07, 2013 12:38
The dongle is working just fine since the system knows the hardware ID off of the dongle. The problem is when you reload software it erases your option keys. Those keys should of been printed off before reinstalling software. If you do not have the option keys saved somewhere, you can call GE with the serial number of the system and they can look up those option keys.
to rate and post a comment
Vimal Prakash Tripathi
re: re: re: re: problem on a GE Logiq 3
October 19, 2013 08:28
dear
can u send me the dongle pic of l3
thanks
to rate and post a comment
adham
re: re: re: re: re: problem on a GE Logiq 3
September 23, 2014 08:53
pls send me engahmedmobark@yahoo.co
to rate and post a comment
adham
re: re: re: re: problem on a GE Logiq 3
September 23, 2014 08:53
pls send me engahmedmobark@yahoo.com
to rate and post a comment