Hello everybody, sorry about my english is not my natural language. I am having problems with a practix 300. When I pulse preparation the equip get stuck and nothing happen. If someone have been dealing with this equip knows that there is a signal call "KV enable" that if you look at the service manual says that appear when you power on the unit. I don´t have that signal and I suppose that is why when you try to prepares the equip doesn´t respond. I want to know to what parameters respond the availability of "kv enable" or if it is only softaware generated.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Matias Canton
Philips Practix 3000 get stuck
October 05, 2013 09:07
Hello everybody, sorry about my english is not my natural language. I am having problems with a practix 300. When I pulse preparation the equip get stuck and nothing happen. If someone have been dealing with this equip knows that there is a signal call "KV enable" that if you look at the service manual says that appear when you power on the unit. I don´t have that signal and I suppose that is why when you try to prepares the equip doesn´t respond. I want to know to what parameters respond the availability of "kv enable" or if it is only softaware generated.
thanks a lot!!!
Biomedical Engineer Matias Canton
to rate and post a comment
Lenny Place
re: Philips Practix 3000 get stuck
October 07, 2013 12:44
check your filaments
to rate and post a comment
Matias Canton
re: re: Philips Practix 3000 get stuck
October 08, 2013 05:59
Thank for your time. The filaments are ok. You can see its trough the tube window and are lighting (of course one per time)
to rate and post a comment
Matias Canton
re: Philips Practix 3000 get stuck
October 08, 2013 05:59
Thank for your time. The filaments are ok. You can see its trough the tube window and are lighting (of course one per time)
to rate and post a comment