Greetings Colleagues,
After turning on the unit starts up the shell Phillips, stops at 25 percent, and displays a black screen with the message that the device initialization problems, try restarting the machine if will not work you call the service. The error code 607.
While turning the unit to a host behind a series of squeaks heard (10-12 pieces), I think that what the BIOS reports the faulty hardware, but could not get into the BIOS recovery record it.
Please help solve this problem.
607 means you CPUI (control pannel user interface)is not working. Either the USB connector or Power connector may have come loose from the control pannel. Start with taking appart the control pannel and check the connections on the bottom of the board. No fun job. Also check Keyboard USB connections.
Ok! I'll try to check the connection. Tell me how do I know the cart Rev. level.
A, B, C, etc.? The unit 01.2006 years, and on the label is not written about it!
It should say hardware Rev. level on the tag that has the serial # if not. then take the back cover off and look on the metal cover. If you can't find it on metal cover you probably have an older rev. with two different computers in the bay.
Dear colleagues!
You were right. I disassembled control pannel user interfatsii, pulled out and put in all the wires, including the USB connection.
After that, the unit for a week working in normal mode.
Thank you all for your help!
Greetings Colleagues,
After turning on the unit starts up the shell Phillips, stops at 25 percent, and displays a black screen with the message that the device initialization problems, try restarting the machine if will not work you call the service. The error code 608.
I need help please
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Aleksander Proof
Philips iU22 errror № 607
February 10, 2012 09:15
Greetings Colleagues,
After turning on the unit starts up the shell Phillips, stops at 25 percent, and displays a black screen with the message that the device initialization problems, try restarting the machine if will not work you call the service. The error code 607.
While turning the unit to a host behind a series of squeaks heard (10-12 pieces), I think that what the BIOS reports the faulty hardware, but could not get into the BIOS recovery record it.
Please help solve this problem.
to rate and post a comment
Skip Kirchhoff
Re: Philips iU22 errror № 607
February 10, 2012 06:49
607 means you CPUI (control pannel user interface)is not working. Either the USB connector or Power connector may have come loose from the control pannel. Start with taking appart the control pannel and check the connections on the bottom of the board. No fun job. Also check Keyboard USB connections.
to rate and post a comment
Phillip Wood
Re: Philips iU22 errror № 607
February 10, 2012 11:45
May be your CPUI but what is your cart Rev. level.
A,B,C, etc.?
to rate and post a comment
Aleksander Proof
Re: Philips iU22 errror № 607
February 11, 2012 11:39
Ok! I'll try to check the connection. Tell me how do I know the cart Rev. level.
A, B, C, etc.? The unit 01.2006 years, and on the label is not written about it!
to rate and post a comment
Phillip Wood
Re: Philips iU22 errror № 607
February 12, 2012 11:50
It should say hardware Rev. level on the tag that has the serial # if not. then take the back cover off and look on the metal cover. If you can't find it on metal cover you probably have an older rev. with two different computers in the bay.
to rate and post a comment
Aleksander Proof
Re: Philips iU22 errror № 607
March 01, 2012 09:57
Dear colleagues!
You were right. I disassembled control pannel user interfatsii, pulled out and put in all the wires, including the USB connection.
After that, the unit for a week working in normal mode.
Thank you all for your help!
to rate and post a comment
Adel Adam
re: Re: Philips iU22 errror № 607
April 04, 2022 10:38
Greetings Colleagues,
After turning on the unit starts up the shell Phillips, stops at 25 percent, and displays a black screen with the message that the device initialization problems, try restarting the machine if will not work you call the service. The error code 608.
I need help please
to rate and post a comment
Jon Himavat
re:re: Re: Philips iU22 errror № 607
May 05, 2022 09:17
608 is normally software corrupted
to rate and post a comment
Adel Adam
re: re:re: Re: Philips iU22 errror № 607
May 06, 2022 11:22
Thank you, I've been the problem in the software, thank you help
to rate and post a comment