hello friends,
I am facing this error in MPH generator after pressing exposure switch , the error is : M3710 which says overcurrent in rotor CTRL during high speed acceleration.
Rotor test gives the following err:
err 239 U010 AD 0000 ED 0000 AA0000
any help is so appreciated.
thnx in advance
We are the best choice for all your Endoscopy needs. We have Certified Pre-Owned refurbished and used Endoscopes, and all other related components and
accessories. We are committed to your absolute satisfaction. (513) 469-7267
Mohamed Ibrahim
MPH M3710 rotor error
March 21, 2010 01:59
hello friends,
I am facing this error in MPH generator after pressing exposure switch , the error is : M3710 which says overcurrent in rotor CTRL during high speed acceleration.
Rotor test gives the following err:
err 239 U010 AD 0000 ED 0000 AA0000
any help is so appreciated.
thnx in advance
to rate and post a comment
yuan bo
Re: MPH M3710 rotor error
March 22, 2010 09:18
first of all check the rotor board, if it is ok, i think you need to replace tube.
to rate and post a comment
Mohamed Ibrahim
Re: MPH M3710 rotor error
March 22, 2010 11:10
well, rotor board is ok, and tube is new.
to rate and post a comment
Staate Hayward
Re: MPH M3710 rotor error
March 23, 2010 12:15
http://apps.gehealthcare.com/servlet/ClientServlet
Error 710
with the 3 in front, it may think it's supposed to have a third tube, hence the error.
to rate and post a comment