Over 450 Pennsylvania Auctions End Tomorrow 07/14 - Bid Now Over 1750 Total Lots Up For Auction at Five Locations - MO 07/15, NJ Cleansweep 07/16, CA 07/17, VA 07/21, CA 07/22
Hello dears. I have a flaw in a Lorad III who could help me. The device presents a constant alarm at the initialization start that indicates high voltage on the panel. And verify the operation of the isolation transformer and I have voltages in the microprocessor and memory control cards (control). However, there is a short in a fuse called F2 of 5 Amp. Someone could help me in this fault please.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
willmary colina
MAMMO LORAD III ERROR
September 10, 2019 11:56
Hello dears. I have a flaw in a Lorad III who could help me. The device presents a constant alarm at the initialization start that indicates high voltage on the panel. And verify the operation of the isolation transformer and I have voltages in the microprocessor and memory control cards (control). However, there is a short in a fuse called F2 of 5 Amp. Someone could help me in this fault please.
to rate and post a comment
JORGE NAVARRO
re: MAMMO LORAD III ERROR
September 12, 2019 09:00
Hello, if you need copies of the service manual I m able to send you.
to rate and post a comment
Juancho
re: MAMMO LORAD III ERROR
September 12, 2019 09:01
Can you explain in more detail the failure of the MIII?
Regards
to rate and post a comment