Does anyone have any service info on this model please. The machine fails it's daily Qa check at the point where lights are tested and the XRay Tube is warming up, message displayed on monitor says failure during XRay ramp-up. The fault will go away for the rest of the day if the vertical cables encased in platic trunking at the bottom of the C-arm are wiggled and QA tests re-done. Any help appreciated
Contact lewisd@adhb.govt.nz
I take care of 2 of these units. If one of the lamps are out it will fail that portion of the test. I do have the service literature for this unit, and some parts. These units are a total mechanical nightmare. John Cude 203 380 5129
We work with hospitals providing reliable ultrasound systems, probes & parts. By offering sales, service, rentals & repairs, we help our clients access high quality imaging systems while keeping costs low & support simple. Please call 760-834-4777!
Lewis Davies
Lunar Expert Bone Densitometer
April 06, 2005 08:25
Does anyone have any service info on this model please. The machine fails it's daily Qa check at the point where lights are tested and the XRay Tube is warming up, message displayed on monitor says failure during XRay ramp-up. The fault will go away for the rest of the day if the vertical cables encased in platic trunking at the bottom of the C-arm are wiggled and QA tests re-done. Any help appreciated
Contact lewisd@adhb.govt.nz
to rate and post a comment
John Cude
Re: Lunar Expert Bone Densitometer
April 07, 2005 08:54
I take care of 2 of these units. If one of the lamps are out it will fail that portion of the test. I do have the service literature for this unit, and some parts. These units are a total mechanical nightmare. John Cude 203 380 5129
to rate and post a comment
ismael ceballos
Re: Lunar Expert Bone Densitometer
April 07, 2005 01:54
maybe the lamps are bad or check the cables, check too, an arcin
luck
to rate and post a comment