If you have a broken Sonosite, Mindray, GE, Philips, Hitachi, or Aloka system or probe contact us today. Free ultrasound & probe EVALS with 1 Year Warranty on all repairs. We repair all orders in 1-5 days. Call 844-644-5440 Email: Sales@Lenard.Healthcare
morteza yousefi
logiq 9 .help
December 10, 2013 08:49
I have logiq 9.when I tern on it good work and open the software for logiq 9.
but some times be white the scan area and can not see any tingh.
after some times tern off the machine be ok it.
any body know about it.
thanks
yousefi
to rate and post a comment
Marcelo Antonio Correa
re: logiq 9 .help
December 11, 2013 05:52
Hi, M! First of anything, I'd performed a deep PM, cleaning all the inside, reattaching all boards in both FEPS and BEP, taking off the processor, just to make sure it is settled and replacing its thermal paste, afterwards. Go far deep in this cleaning, making sure there'll be no sign of dust, in the end. Hope this helps, take care, God Bless. MAC.
to rate and post a comment
Rey Gonzalez
re: logiq 9 .help
December 11, 2013 05:52
run diagnostics . rey@allultrasoundservices.com
to rate and post a comment
Amar
re: logiq 9 .help
December 11, 2013 05:55
I have encountered the same problem with logiq 200. The near field gets fully white after 20 mins from switching ON. The problem is with the ESP board.(board no 2 in logiq 200) Pls check if there is any board named ESP.. if so replace it and try. Also let me know whats the result.
to rate and post a comment