Hello. I have the following problem: When I turn on the device and starts imaging software - I have this error:
https://drive.google.com/open?id=1a17x8ppAKieyMZaNhHY_fTmyb_hPGFry
I measured the LVDS cable and everything looks fine. I think, that the problem is in Camera(Innovision SF) or PC boards(IAPDB, LVDS interface board), but which one....
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Svilen Popov
INFIMED i5 - Camera Communication failure
August 14, 2018 04:28
Hello. I have the following problem: When I turn on the device and starts imaging software - I have this error:
https://drive.google.com/open?id=1a17x8ppAKieyMZaNhHY_fTmyb_hPGFry
I measured the LVDS cable and everything looks fine. I think, that the problem is in Camera(Innovision SF) or PC boards(IAPDB, LVDS interface board), but which one....
to rate and post a comment
Svilen Popov
re: INFIMED i5 - Camera Communication failure
August 16, 2018 04:36
When I turn unit on and start the InfiView program, I have this LEDS on camera and IAPDB board:
https://drive.google.com/open?id=1wmKQFZ9ROTjrbXyTc546qFpVXGbFfvOp
https://drive.google.com/open?id=1E2AqAlj-LLLs_DXW8QKV7WDMzIORC5VS
Someone to know which leds must lights or blinking in normal work mode ???
Thank you in advance
to rate and post a comment