Dear friends,
How can I test a SpO2 sensor without those expensive equipment like Spo2 Analysers or similar ?
In my case I want ot test a Masimo Radical Sensor
Thanks in advance
DEAR , YOU CAN CHECK SPO2 SENSORS , BY A SIMPLE MULTIMETER , CHECK GET THE CONFIGURATION OF THE PINS OF CONNECTOR , IN IT TWO PINS ARE FOR DETECTOR AND 3 FOR I.R AND L.E.D , YOU PUT YOUR METER ON RESISTANSE OPTION AND CHECK , IT WILL SHOW FEW RESISTANSE , AND ON L.E.D CHECKING IT ALSO BLINK THE RED LIGHT AND ON THE OTHERS , IT WILL SHOW ONLY .6666 , SOME THINK LIKE IT .
after all, thanks a lot for your help. I've this problem on 2 equipments. I don't know if the problem is from the sensor or from the monitor. But I don't have the PINOUT of the sensors, do you have it ? One is fron NELLCOR and the other is from MASIMO model RADICAL.
thanks in advance
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Hugo Fiuza
How to test a SpO2 sensor
November 29, 2006 06:10
Dear friends, How can I test a SpO2 sensor without those expensive equipment like Spo2 Analysers or similar ? In my case I want ot test a Masimo Radical Sensor Thanks in advance
to rate and post a comment
javed iqbal
Re: How to test a SpO2 sensor
December 03, 2006 05:12
DEAR , YOU CAN CHECK SPO2 SENSORS , BY A SIMPLE MULTIMETER , CHECK GET THE CONFIGURATION OF THE PINS OF CONNECTOR , IN IT TWO PINS ARE FOR DETECTOR AND 3 FOR I.R AND L.E.D , YOU PUT YOUR METER ON RESISTANSE OPTION AND CHECK , IT WILL SHOW FEW RESISTANSE , AND ON L.E.D CHECKING IT ALSO BLINK THE RED LIGHT AND ON THE OTHERS , IT WILL SHOW ONLY .6666 , SOME THINK LIKE IT .
jeved iqbal
BIOMENDICAL ENGINEER
PAKISTAN & DUBAI
to rate and post a comment
Hugo Fiuza
Re: How to test a SpO2 sensor
December 03, 2006 03:55
after all, thanks a lot for your help. I've this problem on 2 equipments. I don't know if the problem is from the sensor or from the monitor. But I don't have the PINOUT of the sensors, do you have it ? One is fron NELLCOR and the other is from MASIMO model RADICAL.
thanks in advance
to rate and post a comment
peter Hu
Re: How to test a SpO2 sensor
November 15, 2011 10:38
dear friend, you can test the LED. If the LED is right, taht may be good.
to rate and post a comment
Gino Hu
Re: How to test a SpO2 sensor
January 30, 2012 09:56
There are so many questions on SPO2 sensor.
1st, you should test with machine.
2nd, you should test the LED
.....
to rate and post a comment