Hello Anghel. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Hi, I am engineering sabry mahmoud form Egypt
I'm repairing a logic 500md which gives me start CPU MEMORY TEST: and give me sys error : scsi error device:0.1 code: 20166 and stop. I replacing the battery time keeper which measured 0.5 V instead of 2.8V but also replaced does not change anything. how I can do to restore the information necessary to make the software run I don’t have an MO disk "operating software and I don’t have service manual.
Pleas can you help me. Thank you
Hello De-Dieu. I have a Ge Logiq e that was working OK, however, recentely on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give me some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Hello Monte. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Monte Oitker
GE Logic 500 error code
October 18, 2012 03:09
I have the following info from the screen:
SCSI device 0.0 Code 20166
Can anyone decipher this?
to rate and post a comment
Lenny Place
re: GE Logic 500 error code
October 18, 2012 05:40
Bad hard drive I would think
to rate and post a comment
ANGHEL FLORIN
re: GE Logic 500 error code
October 19, 2012 09:29
i can help you with your HDD for your Logiq500
contact me: anghel.florin@amedit.ro
to rate and post a comment
Victor Patrick
re: re: GE Logic 500 error code
April 02, 2014 08:02
Hello Anghel. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Victor Rincon
Dallas
Tel 214-493-8613
to rate and post a comment
safiullah ahmad
re: GE Logic 500 error code
October 20, 2012 12:39
Replaced Harddisk with new one and install software
to rate and post a comment
sabry mahmoud
re: re: GE Logic 500 error code
December 28, 2012 04:04
Hi, I am engineering sabry mahmoud form Egypt
I'm repairing a logic 500md which gives me start CPU MEMORY TEST: and give me sys error : scsi error device:0.1 code: 20166 and stop. I replacing the battery time keeper which measured 0.5 V instead of 2.8V but also replaced does not change anything. how I can do to restore the information necessary to make the software run I don’t have an MO disk "operating software and I don’t have service manual.
Pleas can you help me. Thank you
to rate and post a comment
De-Dieu Hans Pemedjieu Koliou
re: re: re: GE Logic 500 error code
February 02, 2013 11:26
hi Sabry i have the user manual contact me on +237 94 05 05 33 or on dedieu_03@yahoo.fr i what you
to rate and post a comment
Victor Patrick
re: re: re: re: GE Logic 500 error code
April 02, 2014 01:50
Hello De-Dieu. I have a Ge Logiq e that was working OK, however, recentely on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give me some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Victor Rincon
Dallas
Tel 214-493-8613
to rate and post a comment
Bharat sharma
re: re: re: GE Logic 500 error code
April 17, 2014 01:36
dear i have the solution for this problem contact me on my id ultrasoundengineer@gmail.com
to rate and post a comment
Gurinder pal singh
re: GE Logic 500 error code
October 20, 2012 12:39
i can help to remove this error and to get your machine in working order contact :- legend.gippy@yahoo.com
to rate and post a comment
Luciano Alviggi
re: re: GE Logic 500 error code
April 19, 2013 04:49
Dear fiend, I have sama error on 500Pro : System error - scsi Error cod 20166. Were are the solution for this problem ?
Thanks in advanced
to rate and post a comment
morteza yousefi
re: GE Logic 500 error code
October 29, 2012 08:57
the software is botting or no.can you told me about this problem.it mybe is hard disck.
to rate and post a comment
Manjul Kumar
re: GE Logic 500 error code
February 01, 2013 10:30
May be the hard drive board (SCSI) not in working or cpu board configuration cracked.
to rate and post a comment
Luciano Alviggi
re: GE Logic 500 error code
April 19, 2013 04:49
How do you resolve this problem on your system ?
Becouse I have same problem
Thanks in advanced
Luciano
to rate and post a comment
Bharat sharma
re: re: GE Logic 500 error code
April 17, 2014 01:36
bad heard disk or +12, +5volts power supply may be the reason for this problem for scsi error ,
to rate and post a comment
Victor Patrick
re: GE Logic 500 error code
April 02, 2014 08:02
Hello Monte. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Victor Rincon
Dallas
Tel 214-493-8613
to rate and post a comment
Bharat sharma
re: GE Logic 500 error code
April 17, 2014 01:35
bad heard disk or +12, +5volts power supply may be the reason for this problem
to rate and post a comment
george finley
re: GE Logic 500 error code
October 21, 2015 01:23
have also the same problem
to rate and post a comment