Hello Anghel. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Hi, I am engineering sabry mahmoud form Egypt
I'm repairing a logic 500md which gives me start CPU MEMORY TEST: and give me sys error : scsi error device:0.1 code: 20166 and stop. I replacing the battery time keeper which measured 0.5 V instead of 2.8V but also replaced does not change anything. how I can do to restore the information necessary to make the software run I don’t have an MO disk "operating software and I don’t have service manual.
Pleas can you help me. Thank you
Hello De-Dieu. I have a Ge Logiq e that was working OK, however, recentely on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give me some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Hello Monte. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
C2 Management closeout auctions take place on DOTmed.com. Bid today on 345 lots of medical equipment. Onsite or virtual inspection available. Appointments may be made through email at auctions@tryc2.com, or through phone at 540-955-5740.
Monte Oitker
GE Logic 500 error code
October 18, 2012 03:09
I have the following info from the screen:
SCSI device 0.0 Code 20166
Can anyone decipher this?
to rate and post a comment
Lenny Place
re: GE Logic 500 error code
October 18, 2012 05:40
Bad hard drive I would think
to rate and post a comment
ANGHEL FLORIN
re: GE Logic 500 error code
October 19, 2012 09:29
i can help you with your HDD for your Logiq500
contact me: anghel.florin@amedit.ro
to rate and post a comment
Victor Patrick
re: re: GE Logic 500 error code
April 02, 2014 08:02
Hello Anghel. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Victor Rincon
Dallas
Tel 214-493-8613
to rate and post a comment
safiullah ahmad
re: GE Logic 500 error code
October 20, 2012 12:39
Replaced Harddisk with new one and install software
to rate and post a comment
sabry mahmoud
re: re: GE Logic 500 error code
December 28, 2012 04:04
Hi, I am engineering sabry mahmoud form Egypt
I'm repairing a logic 500md which gives me start CPU MEMORY TEST: and give me sys error : scsi error device:0.1 code: 20166 and stop. I replacing the battery time keeper which measured 0.5 V instead of 2.8V but also replaced does not change anything. how I can do to restore the information necessary to make the software run I don’t have an MO disk "operating software and I don’t have service manual.
Pleas can you help me. Thank you
to rate and post a comment
De-Dieu Hans Pemedjieu Koliou
re: re: re: GE Logic 500 error code
February 02, 2013 11:26
hi Sabry i have the user manual contact me on +237 94 05 05 33 or on dedieu_03@yahoo.fr i what you
to rate and post a comment
Victor Patrick
re: re: re: re: GE Logic 500 error code
April 02, 2014 01:50
Hello De-Dieu. I have a Ge Logiq e that was working OK, however, recentely on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give me some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Victor Rincon
Dallas
Tel 214-493-8613
to rate and post a comment
Bharat sharma
re: re: re: GE Logic 500 error code
April 17, 2014 01:36
dear i have the solution for this problem contact me on my id ultrasoundengineer@gmail.com
to rate and post a comment
Gurinder pal singh
re: GE Logic 500 error code
October 20, 2012 12:39
i can help to remove this error and to get your machine in working order contact :- legend.gippy@yahoo.com
to rate and post a comment
Luciano Alviggi
re: re: GE Logic 500 error code
April 19, 2013 04:49
Dear fiend, I have sama error on 500Pro : System error - scsi Error cod 20166. Were are the solution for this problem ?
Thanks in advanced
to rate and post a comment
morteza yousefi
re: GE Logic 500 error code
October 29, 2012 08:57
the software is botting or no.can you told me about this problem.it mybe is hard disck.
to rate and post a comment
Manjul Kumar
re: GE Logic 500 error code
February 01, 2013 10:30
May be the hard drive board (SCSI) not in working or cpu board configuration cracked.
to rate and post a comment
Luciano Alviggi
re: GE Logic 500 error code
April 19, 2013 04:49
How do you resolve this problem on your system ?
Becouse I have same problem
Thanks in advanced
Luciano
to rate and post a comment
Bharat sharma
re: re: GE Logic 500 error code
April 17, 2014 01:36
bad heard disk or +12, +5volts power supply may be the reason for this problem for scsi error ,
to rate and post a comment
Victor Patrick
re: GE Logic 500 error code
April 02, 2014 08:02
Hello Monte. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Victor Rincon
Dallas
Tel 214-493-8613
to rate and post a comment
Bharat sharma
re: GE Logic 500 error code
April 17, 2014 01:35
bad heard disk or +12, +5volts power supply may be the reason for this problem
to rate and post a comment
george finley
re: GE Logic 500 error code
October 21, 2015 01:23
have also the same problem
to rate and post a comment