we encountere some problem with our ge ct scan machine.. it is an octane system,after powering up the machine the sbc will go up and load all its application and the hardware reset become succesful but after sometime it the machine will go shutting down without doing anything. we will start it again but the same process will come which go shutdown by itself.what is causing the problem..thank you for all the advice.
As Mr. Khan suggested this will more then likely work or as maybe a quick fix try this. at the " 5 second apps square stop it login and from the root menu run resetdatabase no spaces all lower case. BTW you can replace the drive with the 9 or 18 gig drive.If for some reason this will not cure your problem its time to think about finding an experienced eng. it will get complicated in this forum to walk you through vxworks troubleshooting. the diags are good enought o put you on the rip scsi or peg.bd as your problem.
Can you check the error log that would be help ful if not then i think probably sbc scam data disk or try to regenrate database and clear the patient data in database regeneration
Sell your scrap MRI magnets! Top prices, free shipping, and fast pickups. Don't let dust-collecting, idle assets go to waste. Contact: ryan.swiderski@cyclicmaterials.earth or call 437-826-1621
grace joy marquez
ge ct/i
October 23, 2012 09:08
we encountere some problem with our ge ct scan machine.. it is an octane system,after powering up the machine the sbc will go up and load all its application and the hardware reset become succesful but after sometime it the machine will go shutting down without doing anything. we will start it again but the same process will come which go shutdown by itself.what is causing the problem..thank you for all the advice.
to rate and post a comment
salman khan
re: ge ct/i
October 23, 2012 03:05
replace scan data disk
salmankhan.ge.ct@gmail.com
to rate and post a comment
Dean Kenney
re: ge ct/i
October 23, 2012 06:47
As Mr. Khan suggested this will more then likely work or as maybe a quick fix try this. at the " 5 second apps square stop it login and from the root menu run resetdatabase no spaces all lower case. BTW you can replace the drive with the 9 or 18 gig drive.If for some reason this will not cure your problem its time to think about finding an experienced eng. it will get complicated in this forum to walk you through vxworks troubleshooting. the diags are good enought o put you on the rip scsi or peg.bd as your problem.
to rate and post a comment
TOM CHARLES
re: re: ge ct/i
October 24, 2012 06:13
Can you check the error log that would be help ful if not then i think probably sbc scam data disk or try to regenrate database and clear the patient data in database regeneration
salmankhan.ge.ct@gmail.com
to rate and post a comment
salman khan
re: re: re: ge ct/i
October 25, 2012 08:51
MR TOM why you used my email address at the last of your message
to rate and post a comment
TOM CHARLES
re: re: re: re: ge ct/i
October 26, 2012 12:24
Sorry Bro
I mistakenly used your email address instead of mine
tomcharles41@yahoo.com
to rate and post a comment