Hi Forum:
During the procedure, get the next message:
GANTRY ACQUISITION SYSTEM CANNOT COMPLY, PLEASE RETRY.
can someone help me with this
Thank you in advance
Alvaro
pow look at the system error log Gantry can't comply because some one (MCB's) did not return the hand shake... If you look at the error log click on the error code several numbers in sequence there it will tell ya the problemo If not check The MCU and Fiber optic's Make sure the raid disk drive are all operational
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
ALVARO BALAREZO
GANTRY ACQUISITION SYSTEM CANNOT COMPLY
May 29, 2013 05:23
Hi Forum:
During the procedure, get the next message:
GANTRY ACQUISITION SYSTEM CANNOT COMPLY, PLEASE RETRY.
can someone help me with this
Thank you in advance
Alvaro
to rate and post a comment
Ed Perez
re: GANTRY ACQUISITION SYSTEM CANNOT COMPLY
May 29, 2013 09:43
Gotta give more info such as !! What kind of unit Sounds Siemens or Marconi
to rate and post a comment
Wang Zhixuan
re: GANTRY ACQUISITION SYSTEM CANNOT COMPLY
May 29, 2013 09:43
What is you said equipment? What is its model?You must tell
that to us.
to rate and post a comment
ALVARO BALAREZO
re: GANTRY ACQUISITION SYSTEM CANNOT COMPLY
May 29, 2013 09:43
The system is MX8000 DUAL VEXP PHILIPS
Alvaro
to rate and post a comment
Ed Perez
re: re: GANTRY ACQUISITION SYSTEM CANNOT COMPLY
May 29, 2013 11:40
pow look at the system error log Gantry can't comply because some one (MCB's) did not return the hand shake... If you look at the error log click on the error code several numbers in sequence there it will tell ya the problemo If not check The MCU and Fiber optic's Make sure the raid disk drive are all operational
to rate and post a comment