Hallo Gerardo the problem is probably the probe but if you can test the probe in another ultrasound or other probe 4d in yours we will be certain about the problem.The other case is either the CCM board in older machines or from BT08 and newer the CRS board.We fix RAB4-8P probes is you want contact me at eskentos@gmail.com.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
GERARDO ALCANTARA
error voluson 730 expert
January 29, 2014 08:24
Hello
I have voluson 730 expert , when I connect 4d convex probe model RAB4-8P the ultrasound give me this message: MotoCtrl error
can you help me please
to rate and post a comment
Gilrubio
re: error voluson 730 expert
January 29, 2014 03:27
try with another one, probably your probe is damaged
to rate and post a comment
Marcelo Antonio Correa
re: error voluson 730 expert
January 29, 2014 06:14
Hi, Gerardo!
It could the probe, as Gilrubio said, CPP or CPM (in older models) boards.
If your equipment is newer, huge chance CPP board is defective.
Hope this helps, take care, God Bless.
MAC.
to rate and post a comment
Ricardo Armenta
re: error voluson 730 expert
January 29, 2014 06:14
you have a problem with the transducer, is either Jamed, stucked or sensor has a problem, we can fix it, please contact me ricardo@ultrasolutions.com
to rate and post a comment
Murat Canpolat
re: error voluson 730 expert
January 30, 2014 08:38
you have a problem with the transducer, I can fix it.
muratcanpolat@hotmail.com.tr
We can repair all 4D probes
Regards
Murat
to rate and post a comment
ngambi joseph
re: re: error voluson 730 expert
February 05, 2014 04:02
Hi my fiend! can you tell me how to repair prob?
my mail josysony@yahoo.fr
to rate and post a comment
EROTOKRITOS SKENTOS
re: error voluson 730 expert
January 30, 2014 08:38
Hallo Gerardo the problem is probably the probe but if you can test the probe in another ultrasound or other probe 4d in yours we will be certain about the problem.The other case is either the CCM board in older machines or from BT08 and newer the CRS board.We fix RAB4-8P probes is you want contact me at eskentos@gmail.com.
to rate and post a comment
Robert Harris
re: error voluson 730 expert
January 30, 2014 11:44
Agreed its most likely the probe but could also be the board. We can supply new replacement boards and exchange parts
to rate and post a comment
Ricardo A. Sanchez
re: error voluson 730 expert
February 19, 2014 07:12
Gerardo, did you repair the probe?
to rate and post a comment