Can anybody help me with error 502 on MPH plus console for prestige table GE.
I only have a calibration diskette, no service software.
How to solve this ram checksum problem.
Somehow there appears to have been a change in the calibration/config/ etc. data to change the checksum. This is usually accessed through the "ASIAN" service access software, the Program-X software, basic service software that should come witht the unit. My notes say it should be in menu 5 to update the checksum F1 and V (valid).
hello dear,
can you please help me to get copy of calibration diskett and parameters SV_VAR.MX for prestige II
I had one but i lost it by wrong format due to bad diskett.
thank you
Specializing in GE, we keep your ICU monitors calibrated and patient-ready—fast, reliable service from expert biomed techs. Southeastern Biomedical: 888-310-7322.
hassen ameur
Error 502 on MPH Plus prestige table
December 17, 2008 05:38
Hello everybody
Can anybody help me with error 502 on MPH plus console for prestige table GE.
I only have a calibration diskette, no service software.
How to solve this ram checksum problem.
Thanks in advance
to rate and post a comment
Staate Hayward
Re: Error 502 on MPH Plus prestige table
December 18, 2008 10:39
Somehow there appears to have been a change in the calibration/config/ etc. data to change the checksum. This is usually accessed through the "ASIAN" service access software, the Program-X software, basic service software that should come witht the unit. My notes say it should be in menu 5 to update the checksum F1 and V (valid).
to rate and post a comment
hassen ameur
Re: Error 502 on MPH Plus prestige table
December 20, 2008 01:24
Thank you very much for your help. The soft you mention didn't come with the equipement but i managed to find a copy.
Regards
hassen
to rate and post a comment
yuan bo
Re: Error 502 on MPH Plus prestige table
December 26, 2008 08:30
dear sir,I have the software,please contact me.
obnauy@163.com
to rate and post a comment
Mohamed Ibrahim
Re: Error 502 on MPH Plus prestige table
January 13, 2010 10:10
hello dear,
can you please help me to get copy of calibration diskett and parameters SV_VAR.MX for prestige II
I had one but i lost it by wrong format due to bad diskett.
thank you
to rate and post a comment