Traying to startingup GE CT/e aplicación software, never starts, After OS Linux is started, a window appears: Welcome to LINUX, and ask for login and password. Does any body know why?
You may need to remove some *ICE files which may got created because of abnormal shutdown of the system few times. So do it like this.
Press Ctrl + Alt + F2 simultaneously. Login as ctuser with password suisie. Change login to superuser with command su and password #bigguy. Now go to directly /usr/g/ctuser and excute command: rm .ICE*
Choose Y when system prompt for answer. This will clear all core files created and power cycle the console. Hope this iwll solve your problem.
I hope you can help me diagnosing the problem in CT/e single slice.
1- Image construction is hung up after 4 to 5 images is displayed .
Then the problem exaggerated to be:
2- On switching system on , no display on the console screen and the digits on gantry only counting 1,2 3, . this process goes on and repeated over as long as the system on.
Manuel Esquer
CT/e startingup problem
October 20, 2012 12:05
Traying to startingup GE CT/e aplicación software, never starts, After OS Linux is started, a window appears: Welcome to LINUX, and ask for login and password. Does any body know why?
to rate and post a comment
Manuel Esquer
re: CT/e startingup problem
October 20, 2012 01:56
I change password but System cant start application just get Linux os
How can I activaste awStart?
to rate and post a comment
Deepak Roy Sharma
re: re: CT/e startingup problem
October 22, 2012 10:03
Hello Manuel,
You may need to remove some *ICE files which may got created because of abnormal shutdown of the system few times. So do it like this.
Press Ctrl + Alt + F2 simultaneously. Login as ctuser with password suisie. Change login to superuser with command su and password #bigguy. Now go to directly /usr/g/ctuser and excute command: rm .ICE*
Choose Y when system prompt for answer. This will clear all core files created and power cycle the console. Hope this iwll solve your problem.
Regards.
Deepak
to rate and post a comment
Manuel Esquer
re: re: re: CT/e startingup problem
October 23, 2012 09:08
Thank you, it was the solution.
to rate and post a comment
roger dussart
re: re: re: CT/e startingup problem
October 23, 2012 09:09
Deeppak, do you know where i can find transmetter and receiver rf for my CTe , because some peaple take it . thanks rdus0001@yahoo.fr
to rate and post a comment
Deepak Roy Sharma
re: re: re: re: CT/e startingup problem
October 24, 2012 10:05
Hello Roger,
I have sent you the details you need on your email.
Regards.
Deepak
to rate and post a comment
roger dussart
re: re: re: re: re: CT/e startingup problem
October 24, 2012 10:50
sorry i don't have received , can you resend it . Thank you
to rate and post a comment
Galal
re: re: re: CT/e startingup problem
November 23, 2013 09:26
Dear Deepak
I hope you can help me diagnosing the problem in CT/e single slice.
1- Image construction is hung up after 4 to 5 images is displayed .
Then the problem exaggerated to be:
2- On switching system on , no display on the console screen and the digits on gantry only counting 1,2 3, . this process goes on and repeated over as long as the system on.
to rate and post a comment
sri raja
re: CT/e startingup problem
October 20, 2012 10:08
sent the email to jsrmedical@hotmail.com
to rate and post a comment