Your Email:
FANOS SPYROU
CRANEX TOME (SOREDEX)
October 15, 2018 08:51
Hi there Who know how i install external warning light pin connector
to rate and post a comment
Kiss Gábor
re: CRANEX TOME (SOREDEX)
October 24, 2018 08:41
Hi! As I see it get out a 5 V signal. Connector J804 (this is on the board N800) and external lights connector DIN3 Pin Signal Description 1 ISOL_EXP Active when exposure button pressed 2 PGND - 3 ISOL_RDY Active when unit is ready for exposures If you can mesure a GND from that you can mesoure a signal for exposure switch also. I hope that above information can help you. Best regards Gábor Kiss
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
FANOS SPYROU
CRANEX TOME (SOREDEX)
October 15, 2018 08:51
Hi there
Who know how i install external warning light
pin connector
to rate and post a comment
Kiss Gábor
re: CRANEX TOME (SOREDEX)
October 24, 2018 08:41
Hi!
As I see it get out a 5 V signal.
Connector J804 (this is on the board N800)
and external lights connector DIN3
Pin Signal Description
1 ISOL_EXP Active when exposure button pressed
2 PGND -
3 ISOL_RDY Active when unit is ready for exposures
If you can mesure a GND from that you can mesoure a signal for exposure switch also.
I hope that above information can help you.
Best regards
Gábor Kiss
to rate and post a comment