Why don't you swap those to digital pcb's and see what the code says. That might tell you which pcb is the problem. Then you might track it down to a component on the board.
Ophthalmic-focused expertise in YAG systems including repair, maintenance and calibration handled with precision by trained professionals. Request service • sales@laserlocators.com • 1-877-924-2020
Kasparoff Vital
Acuson Aspen Problem :(
February 14, 2011 01:02
HI!
When I launch the tests from engineering menu I have the next error:
SVC - 0x621 - Failed - SVC2 Pixel Region Memory checksum test
What is this ?
SVC2 is broken and I need to buy another board?
Or problem with one of two FSIMM memory onboard?
You can see how it work with that error:
http://i1226.photobucket.com/albums/ee413/kasparoff/IMG_7542.jpg
to rate and post a comment
Steve Arey
Re: Acuson Aspen Problem :(
February 18, 2011 09:21
Why don't you swap those to digital pcb's and see what the code says. That might tell you which pcb is the problem. Then you might track it down to a component on the board.
to rate and post a comment