ElsMed engineers are located in four different countries. 24 hour response time to any service call. Service agreement provided for end-users range from a 6 month period to a 3 year period and covers all system spare parts.
Doug Steers
September 08, 2008 09:27
Hodwy folks Doug Steers here and no Im not dead Im back at work I need to reprogram a Siemens Mammomat 3000 system to run at 49kV max instead of 3...
Ricardo Delmonte
November 07, 2008 09:59
When scanning the unit stops and the sreen reads XG ERROR 117 together with the number 532 When I look for that error at the user manual it mentions ...
Dorin Jighira
August 21, 2008 07:21
Im in great need for any documentations referring to Topcon RM-A5000 autorefractometer especially some regarding to optical head calibration and the...
Randy Anderson
February 03, 2016 05:22
I already have a copy of the error codes from a previous entry but I cant find a listing for the start up tests I have a failed test 4 on start-up I...
Dorin Jighira
August 04, 2008 07:57
I need urgent please Is there anyone who can help me for Topcon RM-A5000 documentation Im in great need for calibration procedure especially Man...
Specializing in GE, Southeastern Biomedical delivers precise EKG monitor repairs and expert support you can trust. 888-310-7322.
Roberto Villalba
July 31, 2008 11:42
I have a Philips 05T Q neck coil with a low sn Can the coil be calibrated ...
Johnny Barreto
July 31, 2008 09:45
Does Anybody know where I can get the calibration software which usually comes on floppies of the GE Prestilix 1600X X-Ray generator system ...
Michael Groves
December 12, 2012 09:11
Anyone have a service manual for the IVAC 4200 Vital Check The blood pressure readings are inaccurate I think it needs to be calibrated Thanks...
Mario Silva
November 27, 2017 09:30
I need to adjust the Servo amp board because the Ct doesnt take the home position In the manual doesnt figure that configuration Thanks...
Tim Austin
July 15, 2008 11:43
I have a lorad m-iv that is getting a system 35 error message with very small breasts I went through the filament calibration and thought that took ca...
Email P/N for pricing: sales@Relaxationinc.com (P) 813-925-1314, www.relaxationinc.com
Abdula Saeed El Shafeey
March 02, 2013 09:11
The scan frame starts to rotate about half turn 180 degree then it stops and the drives led goes off I swapped most of the gantry cardfile boards...
Ed Ramirez
August 15, 2008 01:53
I HAVE A LFX SYSTEM WHICH WAS REMOVED IN WORKING CONDITION UPON REINSTALLATION WE TRY TO GO THRU CALIBRATION SEQUENCE WITH NO SUCCESS WE CHECKED KV V...
Roberto Villalba
June 13, 2008 11:12
I need to install the x-ray tube in this CT Somebody knows the password of the service program If it is necessary Thank you ...
Salman Mayo
June 03, 2008 08:56
HI I am facing some error in my lifepak9P defebrillator SERVICE when i charge it the error ENERGY FAULT SHOWS THE ERROE codes showing by defe...
AMX 4 Test Failure
Dan Peddycord
October 07, 2008 04:11
Have AMX 4 with error At turn on I get Test 1 test 2 failure test 3 failure Then display goes blank I found one bad battery at 5 v charged on tric...