For Sale Molecular Devices ImageXpress Micro Confocal High-Content Imaging System with LCI Live Cell Instrument and Water Immersion Options
• Fully Functional
• Serviced & in Stock
• Current Model
• Made in Dec 2023
• Good cosmetic condition
• Technical sales consultation available
• WARRANTY
• Includes remote instrument setup and training session
________________________________________
Here is what you will receive:
• Molecular Devices ImageXpress Micro Confocal High-Content Imaging System
• ImageXpress power and options controller
• Water Immersion Controller
• Installed emission Filters: DAPI, FITC, Cy3, Texas Red, CY5
• Nikon Objectives:
- 4x/.20 CFI Plan Apochromat Lambda D
- 10x/0.45 CFI Plan Apochromat Lambda
- 20x/0.95 WI (Water Immersion) CFI Apochromat LWD Lambda S
• Lumincor Aura III LED light engine
• LCI FC-9 Gas Controller
• Single Slide Holder
• Computer running MetaXpress 6.7.2 & Power Core with license dongle
• Monitor, mouse, keyboard
• Communication and power cables
Software Modules
MetaXpress 6.7 Acquisition and Offline Analysis Software included foundational tools:
• Time-series acquisition and analysis
o Integrated with Acquisition and Analysis Wizards
• Z-series acquisition
o Acquisition integrated with the Acquisition Wizard
• Z-series analysis
o Analysis integrated into the workflow
o Compatible with MetaXpress PowerCore software
• Customized analysis
o Integrated Custom Module Editor
• Asynchronous kinetics
o Built into the Acquisition Wizard
• Basic curve fitting
o Included with the MetaXpress software
• Peak analysis
o Included with the MetaXpress software
• Basic 3D acquisition setup tools
o Includes Z-stack capture, 2D projection options
o Interactive GUI for Z settings
• Modules: (Highlighted are the optional modules that are included with this system)
ImageXpress Micro Confocal HCI System Configuration:
• Camera: Andor Zyla sCMOS
• Spinning disk geometry: 60 um pinhole (single disk)
• High-speed laser autofocus with integrated image autofocus option
• Light Source: Lumencor Aura III solid-state LED engine
• Linear encoded voice coil driven X, Y, and Z stages with better than 25 nm resolution
• 4-position automated objective changer
• Objectives:
- 4x/0.20 CFI Plan Apochromat Lambda D
- 10x/0.45 CFI Plan Apochromat Lambda
- 20x/0.95 WI CFI Apochromat LWD Lambda S (Water Immersion)
• 5-position software-selectable dichroic filter wheel
• 8-position software-selectable emission filter wheel
• Filters Installed: DAPI, FITC, Cy3, Texas Red, CY5
• Sample compatibility: slides and one to 1536-well microplates, round or flat bottom, low to high profile
• Throughput: >160K wells/day confocal, >200K wells/day widefield
• Environmental Control:
- Gas Control: LCI FC-9 Gas Controller (supports 5–10% CO₂)
- Temperature: Maintains 30–40 °C ± 0.5 °C
- Humidity: Minimizes evaporation (≤0.5 µL/well/hr in 96/384-well format)
• Water Immersion Controller: Supports auto-replenishment for long time-lapse imaging
FC-9 (gas mixer info)
Automatic CO2/O2/N2 Mixer produces mixed gas from 100% CO2, 100& O2, 100% and N2 gas cylinders
Features:
• Automatic CO₂/O₂/N₂ gas mixing and supply system
• PID control system regulates and allows precise control of O₂ and CO₂ concentration
• Dynamic orifice control valve and reservoir for ensure gas blends are evenly mixed
• Internal air pump makes CO₂/air mixed gas
• Digital flow meter allows to regulate CO₂/O₂/N₂ gas precisely and individually
• Software supports programing the concentration gradients, and recording CO₂ concentration in real time
• FC-9H uses 100% O₂ cylinder to control full range of O₂ levels from 0% to 99%. (It is possible to produce very low to high concentrations of O₂ mixed gas)
Customization/Options:
• Transmitted Light Option
Testing performed by our in-house service team:
The ImageXpress Micro Confocal HCI System passed all tests and was found to be fully functional:
• We initialized the ImageXpress Micro Confocal System.
• We established communication with the software.
• We checked the clarity of the objectives.
• We ensured proper environmental control features.
• We tested the laser autofocus functionality.
• We ensured clarity in all installed filters.
• We verified the functionality of the Lumencor Aura III.
• We tested the FC-9 Gas Controller.
• We tested water immersion functionality.
• We performed multi-well acquisitions.
• We performed multi-channel slide acquisitions with image stitching.
• We tested the emission and dichroic filter wheel functionality.
• We conducted spatial (GP-2) calibration.
• We confirmed camera clarity and functionality.
• We verified full X and Y stage movement.
• We confirmed the full Z movement.
Instrument Overview:
• The Molecular Devices ImageXpress Micro Confocal system supports widefield and confocal fluorescence imaging modes.
• Features AgileOptix spinning disk with multiple confocal geometries for optimized resolution and throughput.
• Equipped with high-NA Nikon objectives, including 20x water immersion for enhanced 3D imaging.
• Includes 5-position dichroic and 8-position emission filter wheels with DAPI to Cy5 filters.
• Utilizes a sCMOS sensor with >4 MP resolution and >3 log dynamic range.
• ImageXpress Micro Confocal is compatible with slides and 96–1536-well plates.
Instrument Application:
• Quantitative 3D spheroid analysis
• Custom image-based assay development
• Automated cell health and viability scoring
• Volumetric profiling of organoids
• Multi-parameter cell cycle studies
The Key Features:
• Widefield and confocal imaging modes
• AgileOptix spinning disk technology
• High-res sCMOS camera sensor
• Supports 3D and Z-stack imaging
• Automated filter and objective wheels
• Compatible with 1-1536-well plates
Why do so many customers choose to order from us?
Our Advantage
• We have experience servicing and repairing these instruments.
• This instrument goes through all the described service steps before shipping. see the questions section below
• We offer detailed photos and videos of the instruments you buy.
• We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
• We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies.
• Technical sales consultation available
• Remote installation and instrument operation training may be available.
• On-site installation may be available in the Boston Area (New England area)
• US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)
Our Guarantee
• Warranty
• You get after-sales technical support
• Customer references are available
• The instrument will be fully functional!
• Smooth process from the initial quote to order fulfillment
________________________________________
This will ship via freight. Please contact us with your zip code to obtain a shipping quote.
400#
PLEASE NOTE THAT THE QUESTIONS BELOW ARE ANSWERED IN MORE THOROUGH DETAIL ON OUR WEBSITE
Q: Can I view this instrument in person at your facility or do a live Zoom demo before it is shipped to me?
A: We can accommodate both in-person or Zoom demos.
Q: What about the warranty?
A: The instrument comes fully warranted for both parts and labor.
Q: Do you offer installation, service, etc?
A: We offer remote installation and training packages to familiarize you with this instrument.
Q: What should I watch out for when buying a used/pre-owned instrument from another lab?
A: Ensure that the instrument is in good working condition with no damage or wear that could affect its performance. Ask for details about testing steps performed, video demo, and test screenshots.
Q: Do you have more than one of these instruments on hand?
A: We generally carry multiple instruments on hand, along with a variety of spare parts.
Q: This procurement is for a University or College. Are purchase orders with NET terms accepted?
A: We accept purchase orders from all major US and Canadian universities.
Q: How fast will you ship?
A: We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.
Q: Will my instrument be insured during shipping?
A: Absolutely! We insure all our shipments as long as we are the shipper. If a customer ships on their account, they handle insurance.
Q: How do you pack? Have you previously packed and shipped the fragile laboratory instruments?
A: We have extensive experience shipping high-end and complex laboratory instruments in the US and Internationally.
Q: Do you ship Internationally?
A: Yes! We have shipped to multiple continents and over 30 countries.
Q: How much will I save buying it pre-owned, and is it worth it?
A: When compared to buying a new instrument, you will save 60% or more and have plenty of funds left over for an additional instrument or two.
TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.
DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.
ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.
Política de devolução
Items are sold as-is with no returns or refunds available unless explicitly stated.
Get a CPS 2-Year Protection Plan starting at $5.99. Sold separately. Learn more
