Hello everyone!
I have a Lunar DPX-Bravo with encore 2006. QA does not go through and give an error "Swing arm not locked in scanning position. Please lock before continuing."
I tried unlocking and locking the swing arm several times with no change. Any advice on troubleshooting will be highly appreciated.
Hello Mohamed, you could follow cables trought inside arm to bulk heal connector inside tablet ir do a bypass on switch ti determine if is bad. Feel free to contact me if need It. lemedina1964@yahoo.com.mx
You may have a bad limit switch in the arm. There is a limit switch up there that will sense the open and closed position. I would first check to ensure that switch is engaging correctly. If you need parts or other advice let us know.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Mohamed Al-Noseery
GE LUNAR DPX-BRAVO
April 22, 2019 09:25
Hello everyone!
I have a Lunar DPX-Bravo with encore 2006. QA does not go through and give an error "Swing arm not locked in scanning position. Please lock before continuing."
I tried unlocking and locking the swing arm several times with no change. Any advice on troubleshooting will be highly appreciated.
to rate and post a comment
Juan Gaytan
re: GE LUNAR DPX-BRAVO
April 23, 2019 10:06
you have the service manual? write me
Regards
juan.p.gaytan@gmail.com
to rate and post a comment
eduardo medina
re: GE LUNAR DPX-BRAVO
April 23, 2019 10:14
Hello Mohamed, you could follow cables trought inside arm to bulk heal connector inside tablet ir do a bypass on switch ti determine if is bad. Feel free to contact me if need It. lemedina1964@yahoo.com.mx
to rate and post a comment
Juan de la Cruz Martinez
re: GE LUNAR DPX-BRAVO
April 23, 2019 11:13
Have you check if there is a switch that detects the arm is locked?
to rate and post a comment
Rick Ebling
re: GE LUNAR DPX-BRAVO
April 24, 2019 10:16
There are TWO switches in the rotating vertical arm. They have to both be actuated mechanically.
to rate and post a comment
Ben Williams
re: GE LUNAR DPX-BRAVO
April 24, 2019 10:17
HI Mohamed,
You may have a bad limit switch in the arm. There is a limit switch up there that will sense the open and closed position. I would first check to ensure that switch is engaging correctly. If you need parts or other advice let us know.
Ben
info@dexasolutions.com
to rate and post a comment