Keep biomedical devices ready to go, so care teams can be ready to care for patients. GE HealthCare’s ReadySee™ helps overcome frustrations due to lack of network and device visibility, manual troubleshooting, and downtime.
arcenio villegas
November 26, 2013 10:15
Kvp- 8 at low 52KVp calibration mobile pack KVp goes directly to service mode on display when shoot 120 kv in KVp cal No reading kv on kiethley at t...
Mohamed Ibrahim
December 06, 2021 09:58
Dear friends We would like to connect CR 850 with with DV8900 we were not able to change the name of the network on DV8900 Please if any of you can ...
Luis Vargas Carrillo
July 14, 2015 10:41
Hello I recently changed the litium battery of the printer now the printer is working fine its already configured and calibrated but when I connect...
Alaa Mohammed
August 23, 2013 08:29
Hi everyone I have a problem with c-arm C-VISION E-40HE XDT-A110IMD MEDIATRONIX XC-VPC31 As Im told its made in Indiathe image on both monitors...
Joe bello
October 22, 2013 09:08
I have error 094004 image aborted by the IDC I have calibrated the x-ray tube AOP conversion factor measurement mas non-linearity detector gain check...
Adepto Medical is an infusion pump rental, sales, and service company. Our focus is to deliver to our customers the best product and customer service support we can offer. Call (913) 261-9933
Asaf Shabat
April 10, 2019 08:58
GE Vivid I Ultrasound System We have corrupted the hard drive unit After his recovery we copied the image of GHOST which consists of 4 parts 691Mb 69...
Posted by an Anonymous February 10, 2016 02:19
Hello Dear Some one have service manual APELEM BACCARA 9020 I have troubles with tube and I need to calibrate this tube ...
Posted by an Anonymous April 12, 2013 04:50
Please help solving problems of circles at the middel of image Is software problem or hardware Do I need to calibrate syetem Thanks ...
ahmed waly
October 17, 2017 09:32
Dear all In my site we have 2 OEC7700 The first one A needs a newly X-ray tube the second one B needs a newly II and CCD camera Which is the bes...
Alexandr Reuta
July 01, 2012 09:07
Dear friends This is an Activion 16 After formating all HDDs in RDD and Image disk initialization any attempt to scan Air Calibr NRA patient sc...
Our expert team provides prompt, dependable solutions for rentals, sales and repairs on patient monitors, gas modules, telemetry and more! We focus on producing superior results and providing first-class customer service. Call (888) 644-3274.
Manuel Brugat
June 09, 2017 03:23
I am looking for the complete set of Service Manuals including installation calibration schematics etcetc for a Philips Brilliance 40 CT scanner Plea...
Nigel Jay
March 14, 2012 08:29
I have a GE prospeed image fine at 25cm FOV 50cms image fine in middle but artefacts in a circle round the ok bit in the middle A detector proble...
Tuy Do Duy
January 22, 2012 10:40
Dear all I have problem with Toshiba Aquilion Super 4 When I tilt the gantry it impossible tilt I just checked all motor it is OK When I check by sca...
Patrick Cote
September 19, 2017 09:03
HelloI am looking for the software that goes with the IDEXX-CRbasically an Orex machine Ive installed the scanner interface but unable to actually pe...
GE HiSpeed Error 60– 0319H kV unbalanced detected
Fabio Ferreira
January 05, 2015 04:01
Hi Im facing the error 60-0319H kV unbalanced detected Detects that there is more than 12kV difference between kV and kV Is the first ti...