Whether you're looking to purchase, repair, or rent monitoring devices, we've got you covered with our wide range of high-quality products and our exceptional customer service 800-777-6467 sales@pmbiomedical.com
Kian Chaves
May 23, 2018 10:03
Hello Guys Im doing a calibration in CT Siemens Somatom Espirit and I have a problem in the Generator Adaptation Calibration Sigma is out of tol...
Kian Chaves
May 23, 2018 10:05
Hello Everyone I have a central artifact in the image of a Siemens Espirit I believe it is a problem in the central detectors But I would like to c...
Jeremiah Kiblin
October 31, 2014 05:14
Hello Physicists found my Litho unit has a Hi Contrast resolution issue Heres the following found by physicist Minimum Resolution 2lpmm x 15cmFOV i...
jorge fiser
July 23, 2013 04:30
Dears I have a problem with Channel Boards in UM9 HDI It has 8 channel boards Anybody has a procedure to find the defective board I will be grateful...
Galen Hiveley
February 27, 2012 08:55
How do you calibrate AEC for use on a CR system without using a filmscreen system to calibrate density This is a new x-ray system AEC has never been c...
Sell your scrap MRI magnets! Top prices, free shipping, and fast pickups. Don't let dust-collecting, idle assets go to waste. Contact: david.aguiar@cyclicmaterials.earth
Christian von leipzig
June 19, 2008 05:31
Hello i have one QDR4000 when i want to do the first Phantom calibration the scan image is not ok i have to do it 3 or 4 times until the scan is ok wh...
jas kumar
August 31, 2007 01:13
Wanted to ask the importance of Qcal calibration in GE hilight detector systems In one of the Prospeed CT with hilight detectors Qcal calibration fail...
Dave Adams
June 05, 2007 03:48
Dear Readers I would like to get some feedback on a email I plan to send off to the ACR I can see they are the ones most fighting the deficit re...
Oscar Martinez
November 07, 2024 10:38
Hello I would appreciate your help with an image issue in a Toshiba Infinix cath lab Fluoroscopy image becomes grainy and dark KV and mA in automat...
tahar nouri
July 02, 2011 12:41
hi to all i have a permanant artifact on sytec 3000i images artifact appears only with abdominal exams all other exams are ok please ...
Altima will inspire the trust, loyalty and commitment of our customers through positive relationships and collaboration, top quality equipment services, and a clearly superior value proposition. Call Today (469) 644-7063
marco sarcona
March 05, 2024 10:18
I have my Toshiba Nemio 20 reports a calibration error however it works correctly except for the fact that the image has some flashing lines Can you h...
Joseluis Morales
February 16, 2024 10:49
Hello I need to calibrate my planmeca promax classic cephalometric image it seems i need to do a full beam alignment i have the calibration kit but...
Manuel Brugat
November 16, 2020 10:36
Dear Collegues I have a problem calibrating an Advantx RF 8835 Spot film Device I had to replace a part in the mechanism and I did but at the end I ...
Emmanuel Akinyemi Adebisi
July 30, 2020 10:46
Any time exposois made the machine comes with error 205 While the system monitor displayed grap image too high Need assistance to resolve this error...
Siemens Axiom Luminos Tf mFD Detector change
Aaron Anderson
August 18, 2019 11:23
I have physically changed the Canon 50G mobile flat detector on the Luminos TF The system recognizes the change As soon as the system boots the FL-C ...