Siemens S2000 Monitor Utas19c No Video Input - Preste serviços de manutenção a técnicos Forum

Clean Sweep Live Auction on Wed. Sept. 23rd. Click to see the full inventory

Siemens S2000 monitor UTAS19C "NO VIDEO INPUT"

Tags: Ultrasound

Tek Hawk

Siemens S2000 monitor UTAS19C "NO VIDEO INPUT"

November 25, 2016 02:32

Hello,

I have a problem with Siemens S2000 ultrasound. Year of manufacture 2011/07.
After connecting to the power supply. Cooling moniotora still works.
When I pressed the button ON I hear ultrasound start properly, but the monitor still displays "NO VIDEO INPUT"
http://images.tinypic.pl/i/00844/n9ytyqirpsrs.jpg
and a black screen all the time.

When I connect to the "EXT. MONIOTR" moniotr external displays everything perfectly.

Please help me solve the problem.

Best regards,
Tek

1 person liked this
Log inor Register

to rate and post a comment

Tek Hawk

re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT

November 27, 2016 05:46

I plugged an external computer directly to the VGA port on the monitor. The image is displayed correctly, but in the upper left corner shows "FPD TEST OK". The message does not disappear. The message is distorted. Do not operate the buttons or monitor settings.

http://files.tinypic.pl/i/00844/kpkcpdf3cbxf.jpg

Log inor Register

to rate and post a comment

(56)
(18)

Mikhail Zakurdaew

re: re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT

February 26, 2018 04:30

Good afternoon. I have the same problem with UTAS19C.
Did you solve the problem? If so, how? Thank you.
you can answer the mail mhali@mail.ru

Log inor Register

to rate and post a comment

(1)

Ion Dragan

re: re: re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT

December 07, 2018 08:55

Same problem. How to solve? Cheaper than replacing.

Log inor Register

to rate and post a comment

(6)
(1)

Giobbe Vincenzo

re: re: re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT

April 23, 2019 11:13

I have fix the problem.contact me by email

1 person liked this
Log inor Register

to rate and post a comment

(1)

MURUGESAN PANNEERSELVAM

re: re: re: re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT

August 19, 2020 10:36

hai,
we have a same unit , I plugged an external computer directly to the VGA port on the monitor. The image is displayed correctly, but in the upper left corner shows "FPD TEST OK". The message does not disappear. The message is distorted. Do not operate the buttons or monitor settings
please advise

Log inor Register

to rate and post a comment

Andrey Uspenskiy

re: Siemens S2000 monitor UTAS19C NO VIDEO INPUT

February 12, 2020 10:14

Hello

The monitor is connected to a personal computer.
The computer and monitor are turned on.

No image.


If you turn off the monitor's power and connect it again, then:
- the screen saver appears for 1-2 seconds.
- then the computer desktop for a second
- then the image disappears


The monitor is connected via VGA.
Via DVI does not show at all.

220 V comes to the monitor.

This appeared after the hard drive died on the ultrasound and I changed the BIOS of the ultrasound computer.
Possible match



Help please

Log inor Register

to rate and post a comment

Repairs for less with FREE Transducer EVALS! CALL NOW 1-888-838-7488

If you have a broken or defective probe, why not attempt to repair before purchasing? This could save you $1,000’s! With a free evaluation we can let you know the cost of repair if applicable. Call today: 1-888-838-7488 Email: sales@sentinelimaging.net

DOTmed Certified
advertisement

 

one source

 

RSTI Newsletter

 

 

Hitachi