Problem With Toshiba Kxo-80g - Preste serviços de manutenção a técnicos Forum

PROBLEM WITH TOSHIBA KXO-80G

(25)
(6)

Eduardo Vega

PROBLEM WITH TOSHIBA KXO-80G

June 18, 2007 08:02

HELLO!
I'M HAVING A PROBLEM WITH AN X-RAY GENERATOR TOSHIBA MODEL KXO-80G, RELATED WITH THE BOARD MAC PWB, WHEN I TURN ON THE SYSTEM THE LED OF STANDBY MODE REMAIN FLASHING ALL THE TIME, THERE IS NO ERROR CODE IN THE DISPLAY OF THE CONSOLE; I CHECKED THE MAC PWB AND I HAVE A LED CALLED "ERROR" FLASHING, I CHECKED THE MANUAL AND IT SEEMS LIKE I HAVE A MEMORY PROBLEM IN THE MAC PWB, I CHECKED THE BATTERY AND IT WAS DAMAGED, I REPLACED IT AND TRIED TO RELOAD THE TUBE TYPE IN THE BOARD SEQ1 PWB BUT I CAN'T LOAD THE TUBE TYPE ACCORDING TO MANUALS; BESIDES, I STILL HAVING THE LED "ERROR" FLASHING ON THE MAC PWB; IF SOMEONE CAN HELP ME WITH THIS MATTER, IT WILL BE APPRECIATED.
THANK YOU EVERYBODY.

2 people liked this
Log inor Register

to rate and post a comment

Jose Vallejos

Re: PROBLEM WITH TOSHIBA KXO-80G

June 21, 2007 04:31

what led ?.
Please, do you have a service manual ?
i have a KXO80C.

Log inor Register

to rate and post a comment

(25)
(6)

Eduardo Vega

Re: PROBLEM WITH TOSHIBA KXO-80G

June 22, 2007 09:22

This LED is in the MAC PWB and the name for this LED is LED1 called error and i have the version KXO80G for this system.

Log inor Register

to rate and post a comment

Ibrokhim Sultonzoda

Re: PROBLEM WITH TOSHIBA KXO-80G

January 16, 2012 09:58

Dear Sir,

I also have same problem. You repair it or no ?

Best regards,
Ibrohim

Log inor Register

to rate and post a comment

Ibrokhim Sultonzoda

Re: PROBLEM WITH TOSHIBA KXO-80G

January 16, 2012 09:58

Dear Sir,

I also have same problem. You repair it or no ?

Best regards,
Ibrohim

Log inor Register

to rate and post a comment

(35)
(6)
(1)

Edgar Fabio Bilbao Rocha

re:PROBLEM WITH TOSHIBA KXO-80G

February 12, 2017 12:03

Do you have Repaired that problem? I have the same problem.

Log inor Register

to rate and post a comment

(12)
(3)

Yury Kiselev

re: PROBLEM WITH TOSHIBA KXO-80G

August 05, 2017 04:24

Hello!
I have exactly the same problem.
If anyone knows what to do - write, please!

1 person liked this
Log inor Register

to rate and post a comment

(12)
(3)

Yury Kiselev

re: PROBLEM WITH TOSHIBA KXO-80G

January 24, 2018 09:24

Hello!
Now I know how to run the MAС card without replacing it. If you have a problem with this MAC card, then write to me and I'll tell you how to do it.

1 person liked this
Log inor Register

to rate and post a comment

DMEDS

re: re: PROBLEM WITH TOSHIBA KXO-80G

January 29, 2018 03:22

i have all manuals for this system,
if you need it contact me,
magmesme@gmail.com
thanks
regards

Log inor Register

to rate and post a comment

(4)

Mark Betteridge

re: re: PROBLEM WITH TOSHIBA KXO-80G

May 03, 2018 09:11

I have the same problem as Eduardo Vega posted on 18/6/2007. Are you able to assist me to repair the Generator. My Generator is KXO-60G & I have all the manuals.

Log inor Register

to rate and post a comment

DMEDS

re: re: re: PROBLEM WITH TOSHIBA KXO-80G

May 07, 2018 09:47

contact me,
magmesme@gmail.com
regards

Log inor Register

to rate and post a comment

(4)

Mark Betteridge

re: re: PROBLEM WITH TOSHIBA KXO-80G

May 07, 2018 09:50

Yury
Can you explain to me how to repair the problem with the Toshiba KXO-80G generator.
Regards
Mark

Log inor Register

to rate and post a comment

(12)
(3)

Yury Kiselev

re: re: re: PROBLEM WITH TOSHIBA KXO-80G

May 08, 2018 09:40

Hello Mark!
Today I return from vacation. Tomorrow, May 10, after 10 am Moscow time, I'm ready to help you. And while I'm on the road, write as far as possible in detail what kind of problems you have with the generator.
Yury

1 person liked this
Log inor Register

to rate and post a comment

(4)

Mark Betteridge

re: re: re: re: PROBLEM WITH TOSHIBA KXO-80G

May 09, 2018 09:44

Thanks for your reply Yuri.
Toshiba KXO-60G Generator:- Error LED on MAC PWB Flashing. No Error Code on display. Will prep but no Radiographic or Screening exposure. Replaced dead flat back up battery on MAC PWB, no change. Further investigation on this website stopped me attempting a reload of software until I have more information.
Mark

Log inor Register

to rate and post a comment

(12)
(3)

Yury Kiselev

re: re: re: re: re: PROBLEM WITH TOSHIBA KXO-80G

May 09, 2018 03:13

Hello, Mark!
Your answer did not come immediately, so I propose to correspond by mail. So it will be faster. Write me on the mail jury.kiselev@gmail.com
I already prepare the answer for you. I think that we will not repair more than one day.
Yury.

Log inor Register

to rate and post a comment

(12)
(3)

Yury Kiselev

re: re: re: re: re: PROBLEM WITH TOSHIBA KXO-80G

May 09, 2018 03:13

Mark, my contact jury.kiselev@gmail.com

Log inor Register

to rate and post a comment

(97)
(18)

Germni

re: PROBLEM WITH TOSHIBA KXO-80G

October 21, 2019 09:58

Hello
Do you solved this trouble?
I have a system like this and need to replace batt, but I don't reconfig the parameter generator.

Log inor Register

to rate and post a comment

(12)
(3)

Yury Kiselev

re: re: PROBLEM WITH TOSHIBA KXO-80G

October 22, 2019 10:36

I solved the problem. My device is working.
Please write your device in working condition and you just need to replace the battery or did the device stop working due to battery discharge?

Log inor Register

to rate and post a comment

(97)
(18)

Germni

re: re: re: PROBLEM WITH TOSHIBA KXO-80G

October 29, 2019 10:47

on the power board, the system not workind because the batt is dead
I want to condigured this system, type tube .....

Log inor Register

to rate and post a comment

(12)
(3)

Yury Kiselev

re: re: re: re: PROBLEM WITH TOSHIBA KXO-80G

October 31, 2019 09:32

Unfortunately, this X-ray machine is designed so that if the battery is discharged, then you need to change the IAC board. Replacing the battery does not lead to a positive result. However, I know how to manage the minimum cost. I am ready to write you a detailed algorithm. Send me your address

Log inor Register

to rate and post a comment

Technical Assistance & Parts for MRI Scanners 24h/7 days Call 813-925-1314

ElsMed engineers are located in four different countries. 24 hour response time to any service call. Service agreement provided for end-users range from a 6 month period to a 3 year period and covers all system spare parts.

DOTmed Certified DOTmed 100
advertisement

 

advertisement

 

advertisement

 

advertisement