Free shipping to most locations in the USA (Lower 48) and Canada.
This is a Hill Rom Liko Sabina II EE stand assist & full patient lift. Its primary application is to assist in helping users get on their feet. Once upright they can either be moved on the lift or transferred to a bed, chair or other device. LIKO vest type stand assist and conventional slings are available if the buyer has obtained advice from a trained professional concern sizing and application. The lift being sold here has new batteries and a brand new control module. It is warrantied for 30 days (it should run problem free for at least 5 years with only minor maintenance). Only one Sabina is available at this time. We have other lifts in stock as well as a variety of slings and some parts.
According to the European manufacturer;
Liko Sabina II EE sit-to-stand power patient lift is designed mainly for sit-to-stand lifting. The Sabina II lift can also be used for lifts from one sitting position to another. With the appropriate model of sling it works perfectly in cases where the patient has to be lifted in a seated position. The lower leg support and footrest can easily be removed to provide more space.
Adjustable height levels accommodate patients of most sizes, and those who are sensitive to underarm pressure may use a Comfort SlingBar and ComfortVest in combination with Sabina II lift. The lift may also be used as a conventional patient lift for lifting in the sitting position. Easily exchangeable sling bars offer added convenience.
Exchangeable sling bars:
Sabina lift has easily exchangeable sling bars. The most common is the narrow sling bar (SlingBar 350) which is used in combination with Liko SupportVest or Liko SafetyVest. With the wider Comfort Slingbar which is used in combination with ComfortVest, which allows lifting outside the arms and around the upper body.
Sabina II lift has adjustable height levels for different sized users.
*Used primarily for sit-to-stand lifting
*Hand control with two speeds
*Lift under or outside of the arms
*Adjustable lifting-height positions
*Adjustable foot rest & lower-leg support
Maximum load during active lifting: 440lbs
Maximum load during passive lifting: 330lbs
Material: Powder-painted steel
Weight total: 100lbs
Heaviest removable part: 50lbs
Wheels: Standard front 3" twin wheel // Standard back: 3" individual wheel fitted with brake
Foot rest: Removable
Lower-leg support: Adjustable in terms of height and depth, removable
Turning diameter: 46.5"
Emergency lowering device: Mechanical and electrical
Lifting interval: SlingBar 350: 32.5" // Comfort SlingBar: 30.9"
Lifting speed (without load): SlingBar 350: 2.13 inch/sec // Comfort SlingBar: 2.1 inch/sec
Maximum noise output: 46 dB(A)
Protection class: IP X4
Operating forces of controls: 2.4 N
Intermittent operation: Int. Op 10/90, active operation max 2 min. Only 10% of a given length of time may be active, yet no more than 2 min.
Batteries: 2 x 12 V 2.9 Ah. Valve-regulated lead-acid gel-type batteries.
Battery charger: Built-in charger for 115 VAC, 50-60 Hz, max 400 mA.
Lift motor: 24 V 9,2 A, permanent magnetic motor with mechanical safety mechanism
Motor base: 24 V, 5 A, permanent magnetic motor
US buyers will not pay any taxes or tariffs, border related fees or even handling charges. What is paid on check out is all that will be paid.
Canadian buyers will be required to pay Federal GST tax at 5%. No provincial taxes or handling charges will be applied. Buyers in Canada should request an invoice in Canadian funds rather than use the Buy Now option.
Buyers in other locations should write for an estimate of shipping charges in advance of their purchase.
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The buyer is purchasing an item(s) which may have been used for medical purposes and may have the potential to again be used for this purpose, however unless otherwise specified, at the time of sale the item is not considered to be bio-medically certified for use in any jurisdiction. The purchased item(s) is simply a device which operates in the limited manner described in the listing and/or electronic and mechanical components.
The purchaser agrees that the seller shall not be held responsible or liable:
* for any injuries or damages, whether incidental or consequential, associated in any way with the equipment;
* for compliance with regulations on ownership or use of the purchased item within the jurisdiction in which the purchaser resides and/or uses the item.
The purchaser, by buying this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.
The sale of this item may be subject to regulation by Health Canada, the U.S. Food and Drug Administration and other national/provincial/territorial/state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to Health Canada or FDA regulation and it is to be used for regulated medical services in the Canada or the USA, your payment for it indicates you are an authorized purchaser and will comply with these regulations. If you have questions about legal obligations regarding sales of medical devices, you should consult with Health Canada, the FDA or the regulatory authority
If you find the item is not as described in the ad it may be returned for a purchase price refund. Generally, all of our items have an inspection warranty which kicks in upon delivery for a period of 7 to 14 days. It is not an operational warranty as most items sold on DOTmed require biomedical certification before use. If you require additional coverage please contact us prior to purchase.