This item is a Tecan 150 liquid handler and is controlled with Tecan Evoware Software
Made in 2011
This Tecan 150 Liquid Handler is in good working order.
Please see the exact video and photos below.
Testing we performed:
The Tecan 150 Liquid Handler passed all tests and was found to be fully functional:
Aspiration/ Dispense: PASSED
Gripper arm labware transfer: PASSED
System consists of:
Tecan Evo 150 Liquid Handler
Plate gripper arm
PosID barcode reader
(1) 3 position plate carrier
(1) 3 position tip carrier
(1) 2 position plate carrier with tip waste
(1) 3 position reagent carrier
Communication and power cables.
Configuration and Setup:
Robotic Arm(s): Span-8 arm and Roma gripper arm
Volume: 1 to 1000ul for all channels on SPAN-8
Disposable tips, Volumes: 200 or 1000ul can be used
Application: Liquid handling and Sample Preparation
This Tecan 150 Liquid Handler allows for reservoir to plate, plate to plate, test tube to plate transfers and serial dilutions.
The camera shows a wide view of the entire Tecan 150 Liquid Handler. The camera zooms in to the monitor to show the version software.
The Span-8 arm retrieves tips and performs a liquid transfer from a reservoir to a plate. Tips are ejected into tip trash.
The gripper arm transfers the microplate across the carrier. The camera moves 360 degrees around the Tecan 150 Liquid Handler showing all sides and the serial number.
The cart doors are opened to reveal the inside.
TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON "WEBSTORE" TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.
DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.
ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.
Items are sold as-is with no returns or refunds available unless explicitly stated.