Seller assumes all responsibility for this listing.
Brand: CARL ZEISS
Type: Laser - Argon
Model: Visulas 532
MPN: Visulas 532 Green Argon Laser
Depth: 32 inches
Height: 32 inches
Width: 32 inches
Zeiss Visulas 532 Green Argon Laser w Integrated Slit Lamp & Factory Power Table
The Zeiss Visulas 532 Green Laser System comes completely integrated into a factory Zeiss slit lamp, fiber, console with remote and Zeiss factory power table. Fully refurbished, calibrated, and ready to go.
Excellent condition and very low use 532 green laser! We purchased this from the original owner who used the system sparingly over the years. The condition is excellent both mechanically and cosmetically. All functions are working and the laser energy is within 3% to 7% in all treatment ranges! These are excellent numbers for even a new laser. If you are looking for a low cost integrated solution 532nm green laser, this is it! Professional installation recommended, please contact us for a quote.
Voltage Vac: 115/230
Current, a: 8
Kva (POWER NEEDED): 600W maximum
WEIGHT, kg (lb) (DISPLAY): 37(81.4)
W x D, cm (in): 30x 44 (11.8 x 17.3)console
Type (CONFIGURATION): Frequency-doubled Nd:YAG
AIMING BEAM TYPE: Red diode
Energy, mw (Delivered power, W): 0.1-1, 5 steps
DELIVERY MODES: Single, repeat, continuous wave
EXPOSURE TIME, sec (MICROMANIPULATORS): 0.01-2.5, continuous wave
Repeat time, sec (Delivered power, W): Up to 6 Hz, 10 steps
Spot diameter: 50-1,000 parfocal
Slit lamp: Zeiss dedicated slit lamp based on SL-130
OTHER SPECIFICATIONS (AIR SUPPLY): Switchable physician safety filter for slit lamps and surgical microscope; motorized micro- manipulator; diode-on-demand activates pumping diode only when footpedal is pressed; combined 532/Nd:YAG laser system (VISULAS Combi 532) available.