the easiest way is to change ip and ae title on ct console to the printer range. And to use WatchDRYPIXLink as ae title. This name is a client that is already included in the printer if not. Emailme
Hello ..
Can any one please help ..
We had err.234
The printer prints the film and then err apears.
When I open the cover and close the same queue printed again.
When restarting a film comes out while starting.
Significant: Conveyed film to the film release unit, but did not detect SJ2 OPEN (film trailing edge detection).
Probably Cause and Remedy: Jam occurred during film release conveyance.Open the front cover, and remove the jammed film.
1. Using PC-Utility, check sensors, motors, and perform mechanism adjustments. SJ2, MG1
2. If the problem still persists, replace sensors/motors.
3. If the problem still persists, replace the SND board.
(6)
mab73
Service manual for drypix 6000
November 21, 2014 04:16
I need service manual for fuji drypix 6000 in order to connect Seimens ct scan for printing.
to rate and post a comment
Lenny Place
re: Service manual for drypix 6000
November 22, 2014 10:41
send me an email address
to rate and post a comment
(6)
mab73
re: re: Service manual for drypix 6000
November 23, 2014 02:07
kenmwangi@gmail.com
to rate and post a comment
(1)
mohamed ibrahim
re: re: Service manual for drypix 6000
May 04, 2016 09:56
engineering@hospilineltd.com
to rate and post a comment
Thinh Pham Van
re: re: re: Service manual for drypix 6000
June 19, 2019 09:13
Please send me: thinhnd07@gmail.com
to rate and post a comment
LeCan_BinhAnHospital
re: re: Service manual for drypix 6000
July 04, 2016 10:35
I need service manual for fuji drypix 6000, Thank you for suport, lecaneng@gmail.com
to rate and post a comment
Alfonso Franco
re: re: Service manual for drypix 6000
February 09, 2017 04:48
afromo3848@gmail.com
to rate and post a comment
walid felah
re: re: Service manual for drypix 6000
May 25, 2017 10:27
I need service manual for fuji drypix 6000 libyamed@gmail.com
to rate and post a comment
Lenny Place
re: re: re: Service manual for drypix 6000
May 25, 2017 03:21
I am sorry I had it but somehow it got corrupt
to rate and post a comment
Ahmed Hassani
re: re: Service manual for drypix 6000
July 18, 2017 05:10
sarl_hsm@hotmail.com
to rate and post a comment
(1)
Tran Cao Nguyen
re: re: Service manual for drypix 6000
November 24, 2017 09:34
I need service manual for fuji drypix 6000, Thank you for suport. trannguyentbyt@gmail.com.
to rate and post a comment
mohammed alazzani
re: re: re: Service manual for drypix 6000
March 13, 2018 09:07
I need service manual for fuji drypix 6000, Thank you for suport. mohabdalz@gmail.com.
to rate and post a comment
Praulie
re: re: re: re: Service manual for drypix 6000
March 14, 2018 09:45
I need service manual for fuji drypix 6000, Thank you for support. jpsantos@snsenterprisesinc.com
to rate and post a comment
Praulie
re: re: Service manual for drypix 6000
March 14, 2018 09:44
Hi can you also send me the manual for Drypix 6000, and if you have also for FCR Capsula XL II. Thank you.
jpsantos@snsenterprisesinc.com
to rate and post a comment
(1)
Muzammil Muhammad
re: re: Service manual for drypix 6000
May 12, 2018 02:34
muzammil.sagi@gmail.com
to rate and post a comment
Rodrigo Martins
re: re: Service manual for drypix 6000
August 21, 2018 07:00
please sendo to me, rodrigos_martins@hotmail.com
to rate and post a comment
Thinh Pham Van
re: re: Service manual for drypix 6000
June 19, 2019 09:09
thinhnd07@gmail.com Please send me!!! Many thanks
to rate and post a comment
Lenny Place
re: re: re: Service manual for drypix 6000
June 20, 2019 09:30
look fro an email from a site myairbridge
to rate and post a comment
sơn mai
re: re: Service manual for drypix 6000
September 16, 2020 09:37
I need service manual for fuji drypix 6000, Thank you so much
to rate and post a comment
ROBERTO DIAZ BEDOLLA
re: Service manual for drypix 6000
November 22, 2014 10:41
the easiest way is to change ip and ae title on ct console to the printer range. And to use WatchDRYPIXLink as ae title. This name is a client that is already included in the printer if not. Emailme
to rate and post a comment
(1)
Tran Cao Nguyen
re: Service manual for drypix 6000
November 24, 2017 09:34
Hi, please sent to me Service manual of Drypix 6000. Thanks. Email: sangnguyentbyt@gmail.com
to rate and post a comment
Rodrigo Martins
re: Service manual for drypix 6000
August 21, 2018 07:00
rodrigos_martins@hotmail.com
to rate and post a comment
Abdullah Alhadi
re: Service manual for drypix 6000
June 29, 2020 12:45
Hello ..
Can any one please help ..
We had err.234
The printer prints the film and then err apears.
When I open the cover and close the same queue printed again.
When restarting a film comes out while starting.
to rate and post a comment
Lenny Place
re: re: Service manual for drypix 6000
June 30, 2020 10:59
error 234
Error name: Film release unit jam error
Significant: Conveyed film to the film release unit, but did not detect SJ2 OPEN (film trailing edge detection).
Probably Cause and Remedy: Jam occurred during film release conveyance.Open the front cover, and remove the jammed film.
1. Using PC-Utility, check sensors, motors, and perform mechanism adjustments. SJ2, MG1
2. If the problem still persists, replace sensors/motors.
3. If the problem still persists, replace the SND board.
to rate and post a comment