Over 90 Total Lots Up For Auction at One Location - WA 04/08

OEC 9900 boot problem

Tags: C-Arm, GE

(12)
(3)

ClarityDiagnostics

OEC 9900 boot problem

July 27, 2020 10:57

Hi, guys. I have a OEC 9900 Elite system that doesn't boot up. The C-arm gets stuck after 11 arrows, and the left monitor shows this error message:

"SYSTEM ERROR DETECTED
X-rays are disabled. Turn the system off, wait 10 seconds, and then restart the system.
If this message persists, call for service.
Service Information: Vortex IP board is not detected!"

I cannot connect with the system with UtilitySuite. When monitoring the booting process with the switch in the Display Adapter in service mode, it seems that the system is trying to erase the flash nodes and reload them, but it fails showing the error "Board firmware validation FAILED!". I reinstalled software but the issue continues.
All voltages seem to be OK in the passive backplane. I cleaned and reseated all the boards in the rack, visually inspected the Vortex IP board and it seems OK. It doesn't turn on any LED after booting. I think it could be the Vortex IP board but I want to be sure. What else should I check?

Log inor Register

to rate and post a comment

(25)
(5)
(1)

Joe bello

re: OEC 9900 boot problem

July 28, 2020 09:42

have you try to turn on the monitor cart without the C

Log inor Register

to rate and post a comment

(12)
(3)

ClarityDiagnostics

re: re: OEC 9900 boot problem

July 31, 2020 10:12

Hi. Yes, without the c-arm connected, the workstation fails to boot showing exactly the same error messages.

Log inor Register

to rate and post a comment

(12)
(3)

ClarityDiagnostics

re: OEC 9900 boot problem

August 07, 2020 01:05

Hi. In case you were wondering, we replaced the Vortex IP and the system is now working OK.

Log inor Register

to rate and post a comment

stats
DOTmed text ad

Supporting Endoscope Repair Facilities & Equipment Dealers Worldwide

The industry leading ISO 9001/13485 supplier and innovator of endoscope repair parts, tools, devices, training, consulting, and prototyping of endoscopes and endoscope related equipment for more than 20 years. www.IECendoscopy.com 954-217-8780

stats
advertisement

Próximos Eventos de Subasta

NorthWest Supply
TIMED
Apr 08, 2024 (99 lots)