Over 90 Total Lots Up For Auction at One Location - WA 04/08

GE logiq e 2010 How do I know if it has CWD or not ?

(1)
(2)

Eskinder Negash

GE logiq e 2010 How do I know if it has CWD or not ?

January 04, 2021 10:32

Hi
I am about to buy GE logiq e 2010 with a software version R5.2.2 uploaded. I am planning to use it for Abdominal, OBGYN, small part,Vascular and ECHOCARDIOGRAPHY.My question is : Do I need to upgrade the SW,the HW or inserting the option key is enough..how do I know if the machine is upgradable before I purchase it?
Thank you for your expertise advise

Thank you

2 people liked this
Log inor Register

to rate and post a comment

(41)
(7)

Petco Techov

re: GE logiq e 2010 How do I know if it has CWD or not ?

March 05, 2021 02:58

Hi there, usually the software is fully loaded at the manufacture.
Some software options are closed.
But, before purchase,
1) check a small compartment on the bottom (turn the scanner upside-down and see). Unscrew 4 screws, take a small cover off, lift it. You will see a small CW board. If this board is absent (out), you will need to buy it with an option key string.
The 2nd, you may check in the application SW. Turn the scanner ON, press Utility - Admin - System Options. The CW must be active (Permanent).
You can buy CW-option for your Logiq E serial number.

1 person liked this
Log inor Register

to rate and post a comment

(12)
(1)

Muhammad Luqman

re: re: GE logiq e 2010 How do I know if it has CWD or not ?

April 01, 2021 10:44

Hi Petco, i got one question regarding my Logiq E. the problem is last few days the machine still okay. but until yesterday, when the user on the machine, it pop up on the screen said 'Please input the serial number' when i key in the serial number from the bottom sticker at the back on the machine, it come out there is no valid license on this system. how this thing can be happening ? and how to solve it ?

Log inor Register

to rate and post a comment

(1)

Alejandro Avila Carrillo

re: re: GE logiq e 2010 How do I know if it has CWD or not ?

November 23, 2021 04:44

Hi, I follow your instructions, I didn't have the CWD Board, but I have the option Key to activate the mode with the F6 key and in the module of admin I can modify the values for CDW, the question is, if I put the board I need some licenses or software for the full function of the board? Or only I need physically install the board?

Log inor Register

to rate and post a comment

stats
DOTmed text ad

Stretcher Rentals

50+ Stretchers in stock for immediate rentals. Contact us for a today for a quote.

DOTmed Certified DOTmed 100 stats
advertisement

Próximos Eventos de Subasta

NorthWest Supply
TIMED
Apr 08, 2024 (99 lots)