Hi engineers,
My SA X8 when it start, after logo SonoAce X8 appeared .
It display "System error , error code 40".
I not know how to solve this problem.
Can u give advice about this problem and how to fix it.
thanks u in advance
Hi!
This error 40 mean the BeamFormer has problem, may be currupted FirmWare or problem in Hardware. At first reconnect BF boards, check power supply voltages. Clean system from dust (a peciale PC modul).
Franklin is my name. I have a similar problem. The ADM power board has been changed, the DDM also the CW board and the Beam former board has all been changed but the equipment still hangs at 34% showing Error 40.
However the light indicating error status on the ADM panel under the equipment is showing ovp that is over voltage and a click sound while at the initial booting stage. Can anybody in the house give me the idea of ideal voltage coming from the ADM(a/c to D/C module that connects to the DDM. Thanks
Error code 40 means that the CPU Unit has a problem of power supply voltages.
Please check the power supply voltages from the DDM Board (the PSU which is under the scanner). It is very possible that some fusibles which are on the board to be broken). Also clean all the boards from dust and insert again. If the problem persist call help again.
Hello everyone, I have a problem with my medison x8, I am currently looking for the electronic diagram of the electric card (DDM)
does anyone know a torrent or a site where I can download this form.
thank you in advance
vdkhanh
Error code medison SA X8
August 18, 2013 12:04
Hi engineers,
My SA X8 when it start, after logo SonoAce X8 appeared .
It display "System error , error code 40".
I not know how to solve this problem.
Can u give advice about this problem and how to fix it.
thanks u in advance
to rate and post a comment
(18)
Uldis Verdins
re: Error code medison SA X8
August 19, 2013 03:56
Hi!
This error 40 mean the BeamFormer has problem, may be currupted FirmWare or problem in Hardware. At first reconnect BF boards, check power supply voltages. Clean system from dust (a peciale PC modul).
to rate and post a comment
(1)
nevaehtech
re: re: Error code medison SA X8
May 17, 2019 09:03
Franklin is my name. I have a similar problem. The ADM power board has been changed, the DDM also the CW board and the Beam former board has all been changed but the equipment still hangs at 34% showing Error 40.
However the light indicating error status on the ADM panel under the equipment is showing ovp that is over voltage and a click sound while at the initial booting stage. Can anybody in the house give me the idea of ideal voltage coming from the ADM(a/c to D/C module that connects to the DDM. Thanks
to rate and post a comment
(2)
Mendelson
re: Error code medison SA X8
August 20, 2013 04:41
Error code 40 means that the CPU Unit has a problem of power supply voltages.
Please check the power supply voltages from the DDM Board (the PSU which is under the scanner). It is very possible that some fusibles which are on the board to be broken). Also clean all the boards from dust and insert again. If the problem persist call help again.
to rate and post a comment
Kerrouche Mohand
re: re: Error code medison SA X8
September 16, 2014 01:02
hy
I have 2 SA X8, I'm Clean up cards, I check the fuses and power supply, BF card but it's always the same thing, pleas help me
to rate and post a comment
(18)
Uldis Verdins
re: re: re: Error code medison SA X8
September 16, 2014 06:17
What is Your problem? What happen:, simptom, powerup or not, error code, print screen or make image to show as ......
to rate and post a comment
kerrouche mohand
re: re: re: re: Error code medison SA X8
January 26, 2015 08:13
Hello everyone, I have a problem with my medison x8, I am currently looking for the electronic diagram of the electric card (DDM)
does anyone know a torrent or a site where I can download this form.
thank you in advance
to rate and post a comment
Mahmoud Masoudi
re: re: re: re: re: Error code medison SA X8
November 16, 2016 10:05
hello have u got this diagram ? i'm haveing the same problem .
to rate and post a comment
kerrouche mohand
re: Error code medison SA X8
January 26, 2015 08:13
the error 40 is refer to DDM, you must change this card
to rate and post a comment