From the May 2017 issue of HealthCare Business News magazine
National Safety Technology
B4000 Bed System Measurement Device
National Safety Technology B4000 Bed System Measurement Device
The B4000 by BST, formerly National Safety Technologies, provides clear pass/fail indicators for the four critical entrapment zones of a medical bed system. It is the only device that validates compliance set forth by the FDA in its “Hospital Bed System Dimensional and Assessment Guidance to Reduce Entrapment” guidance document that was created and issued in 2006.
National Safety Technology
G4000 Medical Gas Outlet Analyzer
National Safety Technology G4000 Medical Gas Outlet Analyzer
The G4000 by BST, formerly National Safety Technologies, completes multiple tests in seconds while simultaneously developing reports recognized by The Joint Commission. Tests performed: transient flow for critical care areas; gas concentration; expected gas/detected gas; static pressure; flow test; pressure drop. Outlets tested: carbon dioxide; waste anesthetic gas disposal (WAGD); medical air; nitrous oxide; nitrogen; oxygen; vacuum.
National Safety Technology
R7000 Electrical Receptacle Analyzer
National Safety Technology R7000 Electrical Receptacle Analyzer
The R7000 by BST, formerly National Safety Technologies, performs up to 12 NFPA 99 tests and automatically generates reports that are recognized by The Joint Commission. Tests performed: standard “OKX” test to check receptacle wiring polarity; isolated power wiring; line voltage; phase relationship between receptacles; neutral to ground voltage; neutral to ground resistance; ground to ground voltage; ground to ground resistance; contact tension (gripping force) of hot, neutral and ground prongs.
Netech Digimano 2500
High performance, microcontroller–based, pressure/vacuum meter. Menu-driven and user-friendly with large graphics display. Compatible with a wide range of gases and fluids. Includes rechargeable li–ion polymer battery, built-in serial port, data storage and export records capability. Available in pressure ranges 2 psi to 200 psi (accuracies: 0.1, 0.05). Relay outputs can be controlled by user-selectable engineering units.
