The Ritter M9 UltraClave Automatic Sterilizer includes four instrument trays, a stainless steel tray rack, power cord, and a new pre-installed PM (preventative maintenance) kit which includes a new gasket and filters. This unit is fully calibrated to manufacturer specifications, passes spore testing, and has undergone a complete flush of the system.
Warranty: 90 Days - Parts and Labor.
The Ritter M9 UltraClave Automatic Sterilizer sets a time for you after you select your cycle. Press "start" and the M9 fills with the correct amount of water.
The M9 UltraClave Sterilizer features an intuitive LCD display and simple prompts that help you easily select the cycle you need, whether for unwrapped items, pouches, packs, or handpieces. Once the sterilization cycle is complete, the door automatically opens quietly to dissipate the steam and provide fast, efficient drying of your instruments.
This steam pressure autoclave is used in a range of settings, including active surgery center, medical practice, schools, veterinary facility, industrial lab, doctor's clinic, or tattoo establishment.
FeaturesRitter M9 UltraClave Automatic Sterilizer Features
- Reliable and effective for infection control assurance.
- Patented automatic-opening door for efficient, safe instrument drying.
- Steam-flush pressure pulse air removal system ensures proper steam penetration.
- Self Program Controls: Programmable controls allow for creation of different cycle parameters for special sterilization needs.
- Time: 3 to 90 minutes.
- Temperature: 230 to 275 °F.
- Dry Time: 0 to 60 minutes.
- Vent: Slow or fast.
- Pre-Programmed Controls:
- Unwrapped: 270 °F or 132 °C for 3 minutes.
- Pouched: 270 °F or 132 °C for 5 minutes.
- Packs: 250 °F or 121 °C for 30 minutes.
- LCD Display: Indicates cycle selected, temperature, and exposure time for selected cycle. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.
- Simply load it, set it and forget it.
- Maximum space utilization and a complementary design for your sterilization area.
- Reservoir fill port and drain tube located in the front of the unit for ease of draining and filling.
- Meets CAN/CSA C22.2 No. 61010-1, CSA C22.2 No. 61010-2-040-07 Part 2-040.
SpecificationsRitter M9 UltraClave Automatic Sterilizer Specifications
- Dimensions: 20.13" (L) x 15.3" (W) x 15.8" (H) (51 cm x 38.9 cm x 40.1 cm).
- Length with Plug: 20.4" (51.8 cm).
- Countertop Area: 17.88" (D) x 15.3" (W) (45.4 cm x 38.9 cm).
- Pouch Rack: 1.
- Chamber Dimensions: 9" (Diameter) x 15" (Depth) (22.9 cm x 38.1 cm).
- Chamber Volume: 3.5 gallon (13.4 liters) usable volume.
- Trays:
- Two Large: 12" (L) x 7.3" (W) x 0.8" (D) (30.5 cm x 18.6 cm x 2.2 cm).
- Two Small: 12" (L) x 5.6" (W) x 0.8" (D) (30.5 cm x 14.3 cm x 2.2 cm).
- Weight:
- Unit Weight: 73 lb (33.1 kg).
- Shipping Weight: 81 lb (36.7 kg).
- Water Reservoir Capacity: 1.1 gallons (4.1 liters).
- Electrical Requirements: 115 VAC, 50/60 Hz, 15 Amps Single Phase.
- ASME certified.
- Installation: Use on a level, water-resistant material such as laminate, stainless-steel, or stone surface. Allow 2" (5.08 cm) on sides and rear, and 5" (12.7 cm) above to allow space to fill reservoir and change the printer paper roll.
ConfigurationsRitter M9 UltraClave Automatic Sterilizer Configurations
- #MFI-MMK-M9-022-PREVIOUS: MPN #M9-010; Includes four instrument trays. 1st Generation Autoclaves include M9-001, M9-002, M9-003, M9-004, M9-005, M9-006, M9-007, M9-008, M9-009, and M9-010.
- #MFI-MMK-M9-022: 2nd Generation - Includes four instrument trays, stainless steel tray rack, and power cord.
AccessoriesRitter M9 UltraClave Automatic Sterilizer Accessories
The following accessories are compatible and commonly purchased with the M9 UltraClave Automatic Sterilizer:
- #MFI-MMK-9A155001: Midmark M9/M11 Thermal Printer - First Generation (Compatible with #MFI-MMK-M9-022-PREVIOUS).
- #MFI-MMK-9A259001: Midmark M9/M11 Thermal Printer - Second Generation (Compatible with #MFI-MMK-M9-022).
- #002-0371-00: M9/M11 Printer Refill Kit.
- Speed-Clean Chamber Cleaner:
- #002-0396-00: Single Bottle.
- #002-0396-05: Case (12 Bottles).
- #9A226001: M9/M11 Sterilizer Pouch Rack.
- #9A307001: Tray and Cassette Removal Tool.
Return Policy
30 Day Return Policy. Free Return. Return Policy: https://help.mfimedical.com/en-US/return-policy-204649
Tags:
Sterlizer
